MUTINY TC-R/S Breakout with Mini Mount (5-Pin)

Expand the timecode and run/stop functionality of your Sony FX3, FX30, or a7S III mirrorless camera with the TC-R/S Breakout with Mini Mount from MUTINY. This compact breakout unit features a 3-pin Fischer run/stop port and a 5-pin 0B timecode input, connecting to your camera via a built-in 6" Multi-Terminal cable. It also includes a mini mount with a screw, allowing for direct attachment to the camera body—no cage needed.

The compact accessory can mount onto your cage or rig using the included 1/4"-20 thread, and there are two M3 threads that feature spacing to accommodate 15mm or 10.4mm Studio rod standards.

Features

• 5-pin 0B Timecode IN port
• Fischer 3 R/S port (pin 1 = ground, pin 2 = N/C, pin 3 = R/S)
• 6" multi-terminal cable built in
• 1/4"-20 through hole for mounting
• 2 x M3 threaded locating pin holes with spacing for 15mm and 10.4mm (ARRI) standards

FX3 / FX30 / A7S III Timecode Menu Settings

• In the Sony Menu select TC/UB then Timecode Run and select Free Run, and Time Code Make to Preset
• Set your Timecode device and camera to the same frame rate
• Connect your Timecode device (make sure you are outputting timecode and using a cable that is TC device ⤑ camera) to your FX3/30 multi-terminal (multiport USB)

FX3 / FX30 / A7S III R/S Menu settings

Menu ⤑ Setup ⤑ Operation Customize ⤑ Rec with Shutter ⤑ On