Skip to content

Ep 194: Florian Hoffmeister,

BSC on TÁR, working with director Todd Field and Cate Blanchett

0:00 0:00

Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader and Case

SKU | 3731

Expected Delivery -

Mount your DSLR, mirrorless, cine, or ENG camera using this complete CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader and Case system from Miller for your studio or field video production. The system includes a CX6 fluid head, a fixed-length pan handle, a 75 Sprinter II carbon fiber tripod, a mid-level spreader, a set of three rubber feet, and a soft carry case.
Original price $4,147.00 - Original price $4,147.00
Original price
$4,147.00
$4,147.00 - $4,147.00
Current price $4,147.00

Order Now:

Financing:

$374.38 / month

Price Match

What's in the

?

Genuine Expert Advice |

Send us an

about this product or anything else

OVERVIEW

  • CX6 Fluid Head, 75mm Ball Base
  • 75 Sprinter II Carbon Fiber Tripod
  • Mid-Level Spreader
  • Set of Rubber Feet
  • 16-Step Counterbalance (15+0)
  • 3-Step Pan/Tilt Drag + Zero
  • Pan Handle
  • Carry Case

Mount your DSLR, mirrorless, cine, or ENG camera using this complete CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader and Case system from Miller for your studio or field video production. The system includes a CX6 fluid head, a fixed-length pan handle, a 75 Sprinter II carbon fiber tripod, a mid-level spreader, a set of three rubber feet, and a soft carry case.

The CX6 fluid head features a 16-step counterbalance system, a 3-step pan/tilt drag, a side-load plate, and a maximum payload of 26.4 lb. The 75 Sprinter II carbon fiber tripod supports a maximum payload of up to 66.1 lb, features a 75mm bowl head and spiked feet, supports a mid-level spreader, and has a built-in carry handle. Read more below about the items in this kit.

Miller CX6 Fluid Head

The Miller CX6 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 26.4 pounds, adequate for small cinema cameras with rigs or medium sized ENG camcorders. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX6 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX6 will perform reliably. The base of the CX6 is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX6 in dark environments. A fixed length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)

The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible mid-level spreaders, rubber feet, and dollies are available separately.

  • Two-stage carbon fiber tripod for heads with 75mm ball
  • Maximum payload up to 66.1 lb
  • Compatible with separately available mid-level spreader
  • Height extends from 23.6 to 60.4"
  • Built-in carry handle for portability

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Basic Mid-Level Spreader for 75 Sprinter II Tripods

Set up your tripod quickly and safely with this Basic Mid-Level Spreader from Miller. The spreader is compatible with 75 Sprinter II tripods and easily latches onto the tripod legs. The telescopic design extends from a 15.8 to a 25" diameter and allows users to set the tripod leg angle for rapid setup. The durable aluminum spreader helps to stabilize the entire camera system, and its arms are secured with locking latches.

Miller Pan Handle for Compass15 and Compass20 Fluid Heads

The Miller Pan Handle for Compass15 and Compass20 Fluid Heads is a 16mm fixed-length pan arm. The main tube is black-anodized aluminum alloy and features a comfortable rubber grip.

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.

SPECS

Miller CX6 Fluid Head

Camera Plate
Camera Plate Features Sliding Balance Plate
Balance Plate Sliding Range 2.4" / 6 cm
Tripod Platform
Base Mount 75 mm Half Ball
Pan & Tilt
Drag Control Pan: 3-Step Plus 0
Tilt: 3-Step Plus 0
Vertical Tilt +90° to -75°
Physical
Load Capacity 0 to 26.4 lb / 0 to 12 kg
Counter Balance Incremental 15-Step Plus 0
Dimensions 6.6" / 16.7 cm
Weight 4.9 lb / 2.2 kg
Packaging Info
Package Weight 8.7 lb
Box Dimensions (LxWxH) 18.1 x 12.6 x 12.3"

Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)

General
Head Mount Type 75 mm Bowl
Load Capacity 66.14 lb / 30 kg
Maximum Working Height 60.4" / 153.42 cm (without Spreader)
Minimum Working Height 23.6" / 59.94 cm (without Spreader)
Folded Length 27.6" / 70.10 cm
Materials Carbon Fiber
Bubble Level No
Weight 7 lb / 3.18 kg
Legs
Leg Lock Type Flip Lock
Leg Positions Locking 3 Positions and Continuously Adjustable
Independent Leg Spread Yes
Leg Sections 2
Feet Features Spiked
Spreader Mid-Level (Not Included)

Miller 475 Rubber Feet Pads For Select Tripods (Set Of 3)

Dimensions L: 3.7" / L: 95 mm
Weight 8 oz / 210 g
Packaging Info
Package Weight 0.65 lb
Box Dimensions (LxWxH) 7.35 x 5.85 x 5.2"

Miller Basic Mid-Level Spreader For 75 Sprinter II Tripods

Legs
Construction Aluminum and Plastic
Type Mid-Level
Adjustable Yes
Base Diameter 15.8 to 25" / 40 to 64 cm
Weight 14.1 oz / 399 g
Packaging Info
Package Weight 1.38 lb
Box Dimensions (LxWxH) 17.9 x 6.4 x 4.9"

Miller Pan Handle For Compass15 And Compass20 Fluid Heads

Material Anodized aluminum alloy and rubber
Length 15.4" (39.0 cm)
Weight 0.6 lbs (285 g)
Packaging Info
Package Weight 1.1 lb
Box Dimensions (LxWxH) 15.75 x 3 x 2.15"

Miller Arrowx Softcase 2 Stage For Sprinter II And Toggle 2 Stage Tripod Systems (Black)

Physical
Material Ballistic nylon outer shell
Type of Closure Zipper
Padded Yes
Carrying/Transport Options Dual top handles and padded end handle
D-links for optional, user-supplied shoulder strap
Back pack straps
Dimensions 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm
Weight 9.7 lb / 4.4 kg
Packaging Info
Package Weight 12.68 lb
Box Dimensions (LxWxH) 39 x 13.75 x 12"

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare