OVERVIEW
- Power Distribution & Breakout Box
- Gold Mount Plate + Side Plate Design
- 4-Pin XLR Input for AC/DC Hot-Swapping
- D-Tap, 2-Pin LEMO & Fischer Outputs
- 1 x LANC Input, Fischer Trigger Control
- Connector Cable between Plates
- ARRI 3/8"-16 Accessory & Rosette Mounts
- Simultaneously Active Outputs
- Overvoltage Safety Fuse for Power Ports
Power your entire Blackmagic Design URSA Mini Pro 12K rig along with its accessories from a single Gold mount battery using the D-Box from Wooden Camera. The D-Box is a distribution/breakout box designed to provide power to your rig and accessories while passing through backup AC power for hot-swapping, as well as passing through trigger control in one compact unit. The D-Box is made up of a battery plate and a side plate connected by a single cable.
The Gold mount battery plate mounts directly onto the back of the URSA Mini Pro 12K using a Molex connector, so there are no additional power cables to get in the way. It features two 11 to 17 VDC D-Tap outputs to power a variety of accessories. It features a digital safety fuse to shut off any power outputs in case an accessory overloads the connector. The battery plate connects to the side plate using the included power cable.
The side plate mounts onto the camera's rosette and provides a rosette to relocate your original rosette grip or extension. The side plate features a 4-pin XLR input, so you can plug a power input such as mains power for hot-swapping with the battery. There are two each 2-pin LEMO and 3-pin Fischer ports for power, and start/stop trigger control can be passed through via either of the Fischer ports. A LANC input also allows you to pass through LANC trigger control to the camera from a LANC controller.
In addition to the ARRI-style rosette, the side plate offers two 3/8"-16 ARRI-style anti-twist mounts for additional accessories.
Features
- Gold mount distribution and breakout box provides power distribution for the Blackmagic Design URSA Mini Pro 12K camera and accessories
- Simultaneously active output for two each of LEMO and Fischer ports on the side plate, plus two operational D-Taps on the battery plate itself
- LANC input and Fischer output start/stop trigger support
- Battery plate mounts using a Molex cable and the side plate mounts via the original camera rosette
- When used with an AC power supply and the 4-pin XLR input, the box maintains power to the camera and accessories while changing the camera battery
- Digital safety fuse shuts off accessory ports if there is an overvoltage condition
SPECS
Power
| Power Input | 4-Pin XLR: 13 VDC |
| Power Output | 2-Pin LEMO: 12 VDC
3-Pin Fischer: 12 VDC
D-Tap: 11 to 17 VDC |
General
| Camera Power Method | Bare Leads |
| Connectors | 2 x D-Tap
2 x 2-Pin LEMO
2 x 3-Pin Fischer
1 x 4-Pin XLR
1 x 2.5 mm Coaxial |
| Plate Front / Battery Mount | Gold Mount |
| Plate Rear Mount | Proprietary Battery Plate |
| Number of Battery Bays | 1 |
| Accessory Mounting | 3/8"-16 Female |
| Hot-Swap Support | Yes |
| Indicator | LED |
| Dimensions | 8.3 x 5.9 x 1.1" / 21 x 15 x 2.8 cm |
| Weight | 1 lb / 475 g |
