null

Sachtler aktiv10 Sideload Fluid Head with SpeedLevel & 7-Step Drag (100mm Ball)

(No reviews yet) Write a Review
€2,722
SKU:
S2072S
Availability:
Usually Ships in 1-2 Weeks
Weight:
6.40 LBS
Adding to cart… The item has been added

Product Overview

OVERVIEW

  • 26.5 lb Capacity Fluid Drag Head
  • 100mm Half Ball
  • SpeedSwap Clamp-Style Base
  • SpeedLevel Technology

The aktiv10 Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on your tripod. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate production, the aktiv10 supports camera rigs weighing up to 26.5 pounds. This 100mm ball fluid head also features 15 steps of counterbalance, seven steps of pan and tilt drag, and zero settings for both balance and drag.

The proprietary Sachtler SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.

When used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3/8"-16 threaded stud.

The active 10's PrismBubble is a built-in prism level with two viewing windows that enable you to more easily level the head when the legs are at set at maximum height or at an awkward angle. The bubble level also has two levels of illumination—press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag settings, a boon when working in darker environments.

Mount your camera using the included Sideload Plate S that has both a 1/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 4.7", this head balances quickly to accommodate variously configured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.

Features

SpeedLevel Technology

Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place

SpeedSwap Base

Centered around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider

PrismBubble Level

The illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions

26.5 lb Capacity Fluid Head

This 26.5 lb capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs

Stepped Counterbalance and Drag

Fifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts

Sideload Plate S

The Sideload Plate S has 4.7" of travel for balancing your rig and both a 1/4"-20 camera screw and a locating pin

SPECS

Camera Plate
Camera Plate Features Sideload, Sliding Balance Plate
Camera Plate Type Sideload Plate S
Camera Mounting Screw 1 x 1/4"-20 Male with Locating Pin
Balance Plate Sliding Range 4.7" / 120 mm
Safety Lock Yes
Plate Dimensions 5.5 x 2" / 140 x 50 mm
Tripod Platform
Base Mount 100 mm Half Ball
Sachtler SpeedSwap
Pan & Tilt
Drag Control Pan: Stepped 7-Step Plus 0
Tilt: Stepped 7-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -70°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes
Physical
Load Capacity 0 to 26.5 lb / 0 to 12 kg
Counter Balance Continuous 15-Step Plus 0
Pan Handle Fittings 2 x Rosette
Included Pan Handle Length 16.9" / 430 mm
Bubble Level 1 x Illuminated
Operating Temperature -40 to 140°F / -40 to 60°C
Dimensions 7.3 x 5.7 x 5.5" / 186 x 146 x 140 mm
Weight 6.4 lb / 2.9 kg

Reviews

(No reviews yet) Write a Review

Need Something? Contact us!

Phone: (323) 230-3589  Email: email@hotrodcameras.com