Skip to content

Ep 194: Florian Hoffmeister,

BSC on TÁR, working with director Todd Field and Cate Blanchett

0:00 0:00

RigWheels RailDolly Traveler Kit

SKU | RDTK

Expected Delivery -

The RailDolly Traveler Kit from RigWheels is designed to provide stability when using a full-size broadcast camera or similar
Original price $899.00 - Original price $899.00
Original price
$899.00
$899.00 - $899.00
Current price $899.00

Order Now:

Financing:

$81.15 / month

Price Match

What's in the

?

Genuine Expert Advice |

Send us an

about this product or anything else

OVERVIEW

The RailDolly Traveler Kit from RigWheels is designed to provide stability when using a full-size broadcast camera or similar. The RailDolly is ideal for critical audio recording because operation is silent with its semi-soft wheels. This configuration uses one RigPlate, two RigAxles and two different types of skate wheels. Another capability with the RailDolly Traveler Kit is the ability to use it on square or rectangular rails. Square or rectangular rails can be much more rigid than tube/pipe. This configuration also included the parts to configure our RigSkate so you get 2 great options for movement.

RP01 RigPlate

The RigWheels RP01 RigPlate serves as a resourceful component of the camera mounting hardware. Its first function is to serve as a mounting plate for attaching RigWheels. The RigPlate and 1 set of RigWheels (sold separately) provide with smooth movement as a tabletop / skater dolly that can be used on any smooth or hard surface.

Using the RigPlate as a pipe dolly gives a scalable slider / dolly option for the new generation of mid-size and compact cameras. Attaching 2 RigPlates together creates a captive-rail camera carriage that allows secure camera movement at any angle. Using the RigPlate in conjunction with RigAxels (sold separately) adds even more capability to this simple system with a more traditional tabletop dolly setup and a robust pipe-dolly option.

The RigPlate is a camera support platform and can be used for much more than camera movement. A variety of several different mounting points allow you to attach a myriad of accessories. There are ten 1/4-20 and five 3/8-16 threaded holes (industry standard sizes) in addition to four 5/16" and five 3/8" pass-through holes.

The RigPlate can be turned into a rock-solid suction mount by adding the A-Cups or B- Cups (sold separately).

RA02 2-RigAxels

The RigWheels RA02 2-RigAxels_are designed to be used in conjunction with the RigPlate (sold separately). These RigAxels allow for several different additional configurations that provide you with even more options for getting smooth camera movement with the RigWheels system (sold separately).

With the custom inline wheels (sold separately) attached to the ends, you can use these RigAxels to convert the RigPlate (sold separately) into a more robust tabletop dolly with a larger footprint. This is a suitable solution for larger camera setups. Moreover, you can pivot the RigAxels to get curved dolly moves. When used with both the RigPlate and RigWheels, they add a bottom bar to make a captive rail pipe slider.

These RigAxels and the RigPlate can be used together with the RailRunner configuration. Four 1/4"-20 holes allow for easy attachment of the RigMount (sold separately) and A-Cups (sold separately). In this configuration, the RigAxels can serve as mounting points for camera gear as well as stabilization outriggers when using the RigPlate as a camera mount.

Inline Wheels (4-Pack)

Designed to be not too hard and not too soft, this 4-pack of Inline Wheels from_RigWheels is ideal for smooth dolly moves for film and video. Each wheel sports a 2.7" outside diameter and comes equipped with ABEC 7 bearings and spacers for inside the wheels. Additionally, they are easily mounted with either 5/16" or M8 bolts.

LW04 Longboard Wheels (4-Pack)

The 4-pack LW04 Longboard Wheels from RigWheels_are a suitable custom formulation for film and video applications. These wheels are neither too hard nor too soft. They include ABEC 7 bearings and hard-to-find spacers that go inside the wheels.

SPECS

RP01 RigPlate
Packaging Info
Box Dimensions (LxWxH) 8.0 x 8.0 x 1.0"
RA02 2-RigAxels
Packaging Info
Box Dimensions (LxWxH) 10.9 x 8.3 x 1.1"
Inline Wheels (4-Pack)
Diameter 2.7" / 68 mm
Mounting 5/16" or M8 bolts
Packaging Info
Box Dimensions (LxWxH) 9.0 x 5.6 x 0.9"
LW04 Longboard Wheels (4-Pack)
Packaging Info
Box Dimensions (LxWxH) 11.4 x 8.5 x 1.9"

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare