Product Overview
C-Box (Converter, Gold Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male Gold Mount plate attached and passes power through to the camera via the female Gold Mount plate on the other side. The male Gold Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc.
This version attaches between any Anton Bauer QRC size Gold Mount plate and Gold Mount battery. For example, the C-Box (Converter, Gold Mount) can fit between an Anton Bauer Dionic HC battery and the QB Anton Bauer (QRC-EPIC).
Overview:
- Power input via Gold Mount battery, 12-24 VDC .5A
- Attaches between standard Gold Mount battery and camera Gold Mount plate
- LED indicator for Signal and Power on operator side
- 5V mini USB output for accessory power
- 1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessories
- Re-clocks standard SD, HD and 3G SDI data rates
- Auto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/s
- Passes SDI embedded audio and ancillary data
- Operating Temperature 0 to +40 C
- Operating Humidity 0 to 90% Non-Condensing
Signal Information
- Data Types: SMPTE 259/292/424
- Data Rates: 19 Mbit/s through 3.0 Gbit/s
- Re-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/s
- Input/Output Return Loss: > 15dB @ HD, > 12dB @ 3G
- Input Level: 800 mV P-P +/- 20%
- Input Impedance: 75 Ohms +/- 1%
- Output Level: 800 mV P-P +/- 5%
- Output Impedance: 75 Ohms +/- 1%
- Output Jitter: < 0.2 UI
Specifications:
Weight: 635g (1.4 lbs)
Dimensions: 127 x 76 x 178 mm (5.0 x 3.0 x 7.0 in)
