Skip to content

Ep 194: Florian Hoffmeister,

BSC on TÁR, working with director Todd Field and Cate Blanchett

0:00 0:00

Tiltaing Camera Cage Kit C for Panasonic S1/S1R/S1H (Tilta Gray)

SKU | TA-T38-C-G

Expected Delivery -

Featuring a Tilta gray finish and a variety of mounting options, this Tiltaing Camera Cage Kit C from Tilta is designed to provide protection and accessory mounting for your Panasonic S1, S1R, or S1H camera. The kit includes a full camera cage, a quick release top handle with multiple mounting options, a hand strap, an HDMI cable clamp, Arca- and Manfrotto-type plates, a baseplate, two 15mm rods, a 15mm single rod holder, a side focus handle, and a run/stop cable.
Original price $459.00 - Original price $459.00
Original price
$459.00
$459.00 - $459.00
Current price $459.00

Order Now:

Financing:

$41.43 / month

Price Match

What's in the

?

Genuine Expert Advice |

Send us an

about this product or anything else

OVERVIEW

  • Full Cage for Panasonic S1/S1R/S1H
  • Quick Release Top Handle, Baseplate
  • Side Focus Handle with Run/Stop Cable
  • Quick Release Plates, 15mm Rods & Holder

Featuring a Tilta gray finish and a variety of mounting options, this Tiltaing Camera Cage Kit C from Tilta is designed to provide protection and accessory mounting for your Panasonic S1, S1R, or S1H camera. The kit includes a full camera cage, a quick release top handle with multiple mounting options, a hand strap, an HDMI cable clamp, Arca- and Manfrotto-type plates, a baseplate, two 15mm rods, a 15mm single rod holder, a side focus handle, and a run/stop cable.

The full cage features multiple 1/4"-20 threads and two shoe mounts for accessories. The top handle also features two additional shoe mounts, multiple 1/4"-20 and 3/8"-16 threads, and a 15mm rod port. The bottom plate features multiple mounting holes for attaching to a tripod, shoulder rig, or gimbal. The cage mounts onto the baseplate, and the included Arca-type and Manfrotto-type quick release plates can be used to mount the rig onto a tripod. The two 15mm rods attach to the baseplate for additional mounting options.

The side focus handle features a slot for an NP-F570 battery to power your camera or peripherals, as well as a run/stop button and cable for camera control. It also features a focus wheel that can be used with the Nucleus Nano lens focus system. The HDMI cable clamp connects to the cage and prevents your camera cable from pulling.

Tilta Full Camera Cage for Panasonic S1/S1R/S1H Series (Tilta Gray)

This Tilta gray Full Camera Cage from Tilta is a formfitting aluminum cage that protects your Panasonic S1, S1R, or S1H camera during production without impeding access to your camera's functions, displays, ports, or battery. The camera is secured in the cage using a 1/4"-20 mounting screw.

Two integrated shoe mounts provide convenient attachment points for articulating arms, lights, external monitors, and other accessories. The cage also incorporates multiple 1/4"-20 and 3/8"-16 threads around the sides for attaching accessories. A removable NATO-style rail on the bottom of the cage allows you to quickly mount and unmount the cage onto NATO-style clamps and baseplates. When you remove the rail, multiple threads on the bottom of the cage allow you to attach a variety of baseplates, such as Tilta's Manfrotto- or Arca-type plates.

Key Features

  • Compatible with Panasonic S1, S1R, or S1H cameras
  • Retains access to ports, battery, and display
  • Multiple 1/4"-20 and 3/8"-16 accessory threads
  • 1/4"-20 camera mounting screw
  • Removable NATO-style rail that fits Tilta baseplates
  • 1/4"-20 mounting threads on bottom for tripod mounting
  • Two integrated shoe mounts
  • Hand strap included
  • Aluminum and stainless steel construction

Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Tilta Threaded 15mm Rod (Black, 8", Single)

Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.

  • Lightweight anodized aluminum construction
  • The chamfered end eases mounting of rod-based accessories
  • Both ends are threaded for extending the length of the rod

Tiltaing Side Focus Handle Type I (F570, Tilta Gray)

Pair the versatile Tiltaing Side Focus Handle Type I from Tilta with a Nucleus Nano motor for fingertip focus control and with a Nucleus Nano R/S cable for a record start/stop button with compatible cameras. Powered by a separately available F570 L-series type battery, this Tilta gray handle slides onto the base of a half or full Tiltaing camera cage.

This cage component features a knurled focus wheel, an 8V micro-USB output, a 12V output, and a rubberized surface for a secure grip.

Tiltaing 15mm LWS Baseplate Type II (Tilta Gray)

This Tiltaing 15mm LWS Baseplate Type II from Tilta features a flat gray finish and two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4"-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair LWS 15mm rod clamps with spring-loaded locking levers.

SPECS

Tilta Full Camera Cage For Panasonic S1/S1R/S1H Series (Tilta Gray)

Material of Construction Aluminum, Stainless Steel
Accessory Mounting Multiple 1/4"-20 and 3/8"-16 Threads
2 x Shoe Mounts
Tripod Mounting Removable NATO-Style Rail
1/4"-20 Threads
Camera Mounting Screw 1 x 1/4"-20
Dimensions 9 x 6 x 3.5" / 22.9 x 15.2 x 8.9 cm
Weight 1.04 lb / 471.7 g

Tilta Quick Release Top Handle For BMPCC 4K Cage (Tilta Gray)

Material of Construction Aluminum, Stainless Steel
Accessory Mounting Multiple 1/4"-20 and 3/8"-16 Threads
2 x Shoe Mounts
1 x 15 mm Rod Port
1 x 3/8"-16 Thread with Locating Pins
Dimensions 5.6 x 2.8 x 0.8" / 14.3 x 7.1 x 1.9 cm
Weight 6.1 oz / 172.8 g
Packaging Info
Package Weight 0.5 lb
Box Dimensions (LxWxH) 7.1 x 4.2 x 1.8"

Tilta Threaded 15mm Rod (Black, 8", Single)

Diameter 15 mm
Length 7.87" / 200 mm
Material Aluminum
Thread Type Female / Female
Number of Rods 1
Packaging Info
Package Weight 0.15 lb
Box Dimensions (LxWxH) 8 x 5 x 0.2"

Tiltaing Side Focus Handle Type I (F570, Tilta Gray)

Battery Type 1 x NP-F570 L-Series Type
Output 1 x Micro-USB, 8 VDC
1 x 12 VDC
Dimensions and Weight Not Specified by Manufacturer
Packaging Info
Package Weight 0.635 lb
Box Dimensions (LxWxH) 6.2 x 5.4 x 3.5"

Tiltaing 15mm LWS Baseplate Type II (Tilta Gray)

Material of Construction Anodized Aluminum, Stainless Steel
Rod Clamp Type LWS 15 mm
Packaging Info
Package Weight 0.735 lb
Box Dimensions (LxWxH) 6.9 x 4.3 x 2.7"

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare