- Wi-Fi Video Monitoring Solution
- Use Free iOS App to Monitor Video
- Up to 1080p Resolution
- Only 2-Frame Latency
Designed to be used on-set for single or multi-cam productions, the Teradek Serv Pro is the foundation of Teradek's network-based video monitoring system. Connect the Serv Pro unit to your camera's SDI or HDMI port, and up to 10 iOS devices running the free VUER app can monitor the camera's video signal in resolutions up to 1080p with minimal 2-frame latency. The Serv Pro can achieve this through efficient H.264 compression schemes which maintain a high standard of video quality without requiring the massive bandwidth of uncompressed video solutions. Since the transmission is Wi-Fi based, the Serv Pro can be integrated into your local network for increased versatility. Multiple Serv Pro units can be linked over the same network for multi-camera monitoring functionalities. One iPad can monitor up to four simultaneous feeds at the same 1080p resolution and 2-frame latency as a single feed.
Stream Using Local Networks
The Serv Pro connects to cameras via HDMI or 3G-SDI and streams over 2.4/5 GHz Wi-Fi or Ethernet to iOS devices connected to the same network. Each unit supports up to 10 simultaneous connections, whether you connect directly to Serv Pro or to the same wireless access point.
High-Definition at Low Latency
Each Serv Pro feed is streamed at 1080p with just a 2-frame delay. The video stream also includes a stereo audio channel that can be enabled or disabled from the VUER iOS application.
Complements other Wireless Solutions
The Serv Pro operates on 5 GHz Wi-Fi and is a complementary tool to zero delay wireless systems like the Bolt series. With proper frequency management, these systems will work together without interference.
VUER iOS App
The VUER application for iOS puts an entire cinematographer's toolset in your hands, allowing you to use tools such as vectorscopes, false color, focus peaking, and more on each Serv Pro feed you're monitoring. The application is free to use and can be customized to allow users full or limited access to the toolset. VUER can monitor up to 4 Serv Pro feeds at the same time, all in 1080p, and all at the same 2-frame delay.
1 x BNC, SD/HD-SDI
1 x HDMI Type-A
1 x 3.5 mm, analog audio
|Input Resolutions||1080p 23.98/24/25/29.97/30/50/59.94/60
576p (HDMI only)
480p (HDMI only)
|Output Resolutions||1920 x 1080
1536 x 864
1280 x 720
960 x 540
480 x 270
|Compression||Video: H.264 (Baseline, Main, and High Profile)
Audio: AAC-LC, MPEG Layer 2
|Bit-Rate||Max Bit-rate: 15 Mbps (wired), 10 Mbps (Wi-Fi)
|Network Protocols||TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP|
|Supported Video Transport Protocols||Teradek Streaming Protocol (compatible with Teradek Apps, e.g. Live:Air, VUER)|
|Network||Ethernet: 10/100/1000 Base-T
Wireless: 2.4/5 GHz 802.11 a/b/g/n/ac MiMo
|Power||1 x 2-pin LEMO input
Consumption: 8 W (Wi-Fi on), 7 W (Wi-Fi off)
|Dimensions||4.75 x 3 x 1.1" / 12.1 x 7.6 x 2.8 cm|
|Weight||11.6 oz / 329 g|
|Package Weight||2.6 lb|
|Box Dimensions (LxWxH)||6.7 x 6.4 x 4.8"|