null

Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit

(No reviews yet) Write a Review
$5,999.00
SKU:
15-0047-1
Weight:
3.00 LBS
Adding to cart… The item has been added

Product Overview

OVERVIEW

  • Latitude MDR-X Receiver
  • MOTR.X Super-Speed Brushless Lens Motor
  • CTRL.3 Wireless Lens Controller
  • 5 x White Marking Disks
  • 1 x Iris, 10 x Focus Mapping Disks
  • LP-E6 Batteries with Charger
  • 19/15mm Rod Clamp with 1/4"-20 Mount
  • Motor, Controller, USB, and Power Cables
  • Hard-Shell Case with Custom Foam
  • Controller Neck Strap Included

Wirelessly control your lens focus, iris, or zoom with this Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit. The kit includes a CTRL.3 wireless lens controller, an MDR-X wireless receiver, a MOTR.X super-speed brushless lens motor, LP-E6 batteries and a charger, a 19/15mm rod clamp, one iris overlay mapping disk, five focus overlay mapping disks calibrated in feet, five focus overlay mapping disks calibrated in meters, five extra white marking disks for the controller, and a controller neck strap, as well as motor, controller, USB, and power cables. A vinyl zipper bag is included for your accessories, and a hard-shell case with custom foam is also included to carry the entire kit.

Connect the 0.8 MOD lens gear motor to your lens, mount it on a 19 or 15mm rod system, and then connect the wireless receiver to the motor using the included cables. Each MOTR.X super-speed motor features six times the service life of brushed motors and has higher torque and speed compared to previous models. The MDR.X receiver can control up to three lens motors for 3-axis focus, iris, zoom control, and includes RED camera support.

The CTRL.3 controller can then connect and finely control either the focus, iris, or zoom from up to 5000' away. It is powered by the included LP-E6 batteries, and can also connect to the motor with the included controller cable for a wired setup.

The overlay marking disks are automatically calibrated in feet and meters with the included lens mapping firmware license, and extra white marking disks are included for manual marking. The firmware can also pair with a SmallHD monitor using the included cables and can display lens data directly onto the monitor. Read more below about the items included in this kit.

Teradek RT MOTR.X Brushless Lens Motor

Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field.

The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling. The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.

  • Super-speed focus, iris, or zoom lens motor
  • Features 3Nm torque and a maximum speed of 6.2 revolutions per second
  • One input and one output motor control port allows for daisy-chaining with other MOTR.X motors
  • Built-in rod clamp allows mounting onto 15 or 19mm rods
  • Constructed with aluminum for durability

Teradek RT Controller Neck Strap

This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.

Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug

The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.

Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount

The RT Receiver Rod Clamp from Teradek is used to securely mount an RT receiver to a single 19mm or 15mm rod. Mount the Receiver Rod Clamp directly to the 1/4"-20 thread on an MDR-M or MK3.1 Receiver, or to the 1/4"-20 thread on the mounting bracket for the MDR-MB unit. This compact, double bracket's 1/4"-20 thumbscrew fastens to a 19mm rod on one flank, or to a 15mm rod on the other.

Teradek Monitor Bracket for CTRL.1/CTRL.3 Hand Controllers

This Monitor Bracket from Teradek is designed to mount the SmallHD FOCUS, CINE 7, or 703 Bolt monitor directly on the CTRL.1 or CTRL.3 hand controller.

SPECS

Teradek RT MOTR.X Brushless Lens Motor

Material of Construction Aluminum
Connectors Input: 1 x 0B.4 (Daisy-Chainable)
Output: 1 x 0B.4 (Daisy-Chainable)
Gear Pitch 0.8 MOD
Maximum Speed 6.2 rps
Torque 3 Nm Peak, 2 Nm Continuous
Rod Compatibility 15 and 19 mm
Operating Voltage 7 to 17 V
Power Input <1 W Idle, 80 W Peak
Operating Temperature -4 to 122°F / -20 to 50°C
Packaging Info
Package Weight 0.81 lb
Box Dimensions (LxWxH) 6 x 4.2 x 2.2"

Teradek RT Controller Neck Strap

Dimensions Not specified by manufacturer
Packaging Info
Package Weight 0.1 lb
Box Dimensions (LxWxH) 5.5 x 1.5 x 1.1"

Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger With US Plug

Input Power 100 to 240 VAC, 50 / 60 Hz, maximum 150 mA
12 to 24 VDC
Output Voltage 4.2 VDC, 600 mA
Dimensions Not specified by the manufacturer
Weight Not specified by the manufacturer
Packaging Info
Package Weight 0.305 lb
Box Dimensions (LxWxH) 6.8 x 5.8 x 2.65"

Teradek RT Receiver 19/15mm Rod Clamp With 1/4"-20 Mount

Rod Clamp Type 15/19 mm
Mounting Screw 1/4"-20
Packaging Info
Package Weight 0.08 lb
Box Dimensions (LxWxH) 1.55 x 1.5 x 1.45"

Teradek Monitor Bracket For CTRL.1/CTRL.3 Hand Controllers

Packaging Info
Package Weight 0.46 lb
Box Dimensions (LxWxH) 6 x 4.2 x 2.1"
 

Reviews

(No reviews yet) Write a Review

Need Something? Contact us!

Phone: (323) 230-3589  Email: [email protected]