__The Microphone Holder Bracket provides offset support for any standard microphone bracket fitted with a 3/8" thread. The Microphone Holder Bracket can be attached to any ARRI 3/8" accessory interface, such as handles, cage arms and top plates.

QUICK BITS Two 3-Pin XLR Inputs / Two Outputs Record Audio from Mics, Mixers, Etc. Phantom Power Input This is the same_Atomos LEMO Type to XLR Breakout Cable_that comes included with the Shogun._Featuring two XLR inputs/two XLR outputs, this cable...

HIGHLIGHTS D-Tap to 2-Pin LEMO 18" Cable Length Powers DXA-ALEXA and DXA-CINE from D-Tap DESCRIPTION The BT-PWR D-Tap to 2-Pin LEMO Power Cable from Beachtek is an 18" cable for connecting a V-mount or Gold mount battery to a...

OVERVIEW Ideal for ENG and DSLR Audio for Video 2-Channel Receiver Two Bodypack Transmitters Two Omnidirectional Lavaliers 96 Selectable UHF Channels Mic or Line Input Line and Headphone Outputs Powered via AA Batteries 3.5mm and XLR Output Cables Belt...

680ms delay (340ms for 96kHz signals) On-the-fly adjustment with no image overlay Tweaking in 1ms and 1/3ms steps 36 preset delays for instant recall Fully featured remote control with numeric keypad for discrete delay entry Discrete input switching,...

Description 4-Up DX100 system without headsets: MB100 Single-Channel stand-alone license-free mobile base station w/2 antennas; 115/230 VAC power supply, 115VAC power cord, AA battery sled for base; 4 BP200 Beltpacks with; 8 BAT41 batteries and 4...

This Hosa 3-Pin XLR Male to 3-Pin XLR Female Balanced Cable is a 2-conductor balanced microphone cable that is geared for the budget-conscious customer. Features black connectors. 76% coverage braided shield Cable Type 3-Pin XLR balanced...

This Hosa DMX 5-Pin XLR Male to 5-Pin XLR Female Cable is a 5' long extension cable ideal for use with sound and lighting control boards. Shielded, with durable connectors. Cable Type DMX 5-pin extension cable Length 5' (1.5 m) Shielding...

This Hosa Stereo Mini Female to 2x 1/4" Mono Male Y-Cable can be used to split a stereo mini 3.5mm signal to two 1/4" mono connections, or to combine a Left and Right 1/4" signal into one mini stereo female jack. Cable Type Stereo mini 3.5mm...

Attaches to V-Mount Camcorders Attaches without Screws D-Tap Connector Supplies 50W Adjustable Plate Depth Detachable Rear Panel The IDX A-WMR Wireless Receiver Mounting Bracket is an optional adapter designed to mount HD-drives and...

Two Locking XLR Input Connectors Low-Noise Microphone Preamplifiers 4-Segment Meters can be User-Calibrated Switchable 12V / 48V Phantom Power Audio Output Bracketing Feature AGC Disable Switch Mic/Line Signal Level Switches Hi/Lo Gain Level Switches...

PREMIUM Metallic HDMI® Active Equalizer Extender Repeater - Extend Upto 131FT This HDMI® equalizer is used to extend the effective length of HDMI cables up to 100ft. It works by using the internal power of the HDMI® bus to enhance and...

Timecode generator with Lemo connector The Tig eQ is essentially the only Timecode Generator you will ever need, Great for camera work and drones.__ Features: Locking Connector (choice of BNC or Lemo) Powered by changeable batteries (AAA) for...

Timecode generator with BNC connector The Tig eQ is essentially the only Timecode Generator you will ever need, Great for camera work and drones. Features:__ Locking Connector (choice of BNC or Lemo) Powered by changeable batteries (AAA) for...

HDMI Powered Splitter 8 x HDMI Output supporting up to v1.3b and 1440p 1 x HDMI Input supporting up to v1.3b and 1440p Essentially all available audio options are supported 6 seconds EIDI Duration This OREI HD-108 HDMI Powered Splitter Will Take Any...

PRODUCT HIGHLIGHTS Measures 10' (3m)Five Collapsing SectionsFits NTG-1, NTG-2 & Video Mic3/8" Threaded StudRode's Boompole_provides up to 10' of extension for shotgun microphones. The pole uses a 3/8" industry-standard thread and is designed to fit SM3...

PRODUCT HIGHLIGHTS Adjustable 11 to 15.74" (280 to 400mm)Includes Cable ClipsIncludes 3/8" to 5/8" AdapterThe_Rode DS1 Microphone Desk Stand_is designed to securely desk-mount any microphone. The stand features an adjustable height between 11 to 15.74"...

PRODUCT HIGHLIGHTS For Concealing Lavalier MicsAbsorbs Noise & Vibration2 Mounting Points for Redundant MikingMade of Skin-Safe MaterialIncludes Skin-Safe AdhesiveThe 10-pack of the_invisiLav Discreet Lavalier Mounting System_from_Rode_is designed to...

Product HighlightsFor Concealing Lavalier MicsAbsorbs Noise & Vibration2 Mounting Points for Redundant MikingMade of Skin-Safe MaterialIncludes Skin-Safe Adhesive   The 3-pack of the invisiLav Discreet Lavalier Mounting...

PRODUCT HIGHLIGHTS Secures Rode Lavalier MicrophonesThese_Rode LAV-CLIP Clip Mounts_are sold as a pack of 3 and are used to secure Rode lavalier microphones onto clothing. Dimensions (HxWxD) 0.94 x 0.43 x 1.06" (24 x 11 x 27mm) Weight 0...