Skip to content

Ep 194: Florian Hoffmeister,

BSC on TÁR, working with director Todd Field and Cate Blanchett

0:00 0:00

Sachtler aktiv8 flowtech 75 GS Tripod System

SKU | S2068S-FTGS

Expected Delivery -

The Sachtler aktiv8 flowtech75 GS Tripod System pairs the activ8 fluid head with the lightweight, carbon fiber flowtech 75 GS tripod with a ground spreader.
Original price $3,958.00 - Original price $3,958.00
Original price
$3,958.00
$3,958.00 - $3,958.00
Current price $3,958.00

Order Now:

Financing:

$357.31 / month

Price Match

What's in the

?

Genuine Expert Advice |

Send us an

about this product or anything else

OVERVIEW

  • aktiv6 Sideload Fluid Head
  • flowtech75 Tripod
  • Ground Spreader, Carry Handle, Bag
  • SpeedSwap Clamp-Style Base

The Sachtler aktiv8 flowtech75 GS Tripod System pairs the activ8 fluid head with the lightweight, carbon fiber flowtech 75 GS tripod with a ground spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 26.5 lb. A padded carrying bag rounds out this tripod kit.

Sachtler aktiv8 Sideload Fluid Head with SpeedLevel & 7-Step Drag (75mm)

The aktiv8 Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on your tripod. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate productions, the aktiv8 supports rigs weighing up to 26.5 pounds. This 75mm ball fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.

The SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.

When used with a separately available flowtech tripod, the aktiv8 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3/8"-16 threaded stud.

The PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.

Mount your camera using the included Sideload Plate S that has both a 1/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 4.7", this head balances quickly to accommodate variously configured rigs The Sachtler aktiv8 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.

Features

SpeedLevel Technology

Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place

SpeedSwap Base

Centered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider

PrismBubble Level

The illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions

26.5 lb Capacity Fluid Head

This 26.5 lb capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras

Stepped Counterbalance and Drag

15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts

Sideload Plate

The sideload plate has 4.7" of travel for balancing your rig and both 1/4"-20 and 3/8"-16 camera screws

Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader

The Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 7 pounds yet they can support a payload of up to 44 pounds and extend from a minimum height of 10" to a maximum height of 62.2" when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground without the spreader. An attachment point and carry handle are included.

Features

  • Dual-stage, carbon fiber, 75mm bowl tripod
  • The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
  • The included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard/delicate surfaces without the spreader.
  • Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.
  • The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.

Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head

With dimensions of 36.6 x 7.9 x 9.1", this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

  • Padded bag with dimensions of 36.6 x 7.9 x 9.1", designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
  • 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
  • Full-length zipper allows for easy access to the interior compartment
  • Connecting hand straps, side handles, and D-rings available for transport
  • Clear plastic window on one of the sides allows you to insert a name tag for easy identification

SPECS

Sachtler Aktiv8 Sideload Fluid Head With SpeedLevel & 7-Step Drag (75mm)

Camera Plate
Camera Plate Features Sideload, Sliding Balance Plate
Camera Plate Type Sideload Plate
Camera Mounting Screw 1 x 1/4"-20 Male
1 x 3/8"-16 Male
Balance Plate Sliding Range 4.7" / 120 mm
Safety Lock Yes
Plate Dimensions 5.5 x 2" / 140 x 50 mm
Tripod Platform
Base Mount 75 mm Half Ball
Sachtler SpeedSwap
Pan & Tilt
Drag Control Pan: Stepped 7-Step Plus 0
Tilt: Stepped 7-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -70°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes
Physical
Load Capacity 0 to 26.5 lb / 0 to 12 kg
Counter Balance Continuous 15-Step Plus 0
Pan Handle Fittings 2 x Rosette
Included Pan Handle Length 16.9" / 430 mm
Bubble Level 1 x Illuminated
Operating Temperature -40 to 140°F / -40 to 60°C
Dimensions 7.3 x 6.1 x 3" / 186 x 156 x 75 mm
Weight 6 lb / 2.7 kg

Sachtler Flowtech 75 GS Carbon Fiber Tripod With Ground Spreader

General
Head Mount Type 75 mm Bowl
Load Capacity 44 lb / 20 kg
Maximum Working Height 62.20" / 1.58 m (with Spreader)
5.02' / 1.53 m (without Spreader)
Minimum Working Height 16.14" / 0.41 m (with Spreader)
10.24" / 0.26 m (without Spreader)
Folded Length 27.17" / 69 cm
Materials Aluminum, Carbon Fiber
Weight 6.39 lb / 2.9 kg
Legs
Leg Lock Type Lever Lock
Independent Leg Spread Yes
Leg Sections 3
Feet Features Dual Spiked
Spreader Ground (Included)
Center Column
Packaging Info
Package Weight 10.15 lb
Box Dimensions (LxWxH) 28.75 x 7.25 x 7"

Sachtler Padded Bag For Flowtech 75 Or TT Tripod With FSB Fluid Head

Exterior Material Nylon
Padded Yes
Packaging Info
Package Weight 4.6 lb
Box Dimensions (LxWxH) 36.5 x 9 x 6.8"
 

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare