Skip to content

Ep 194: Florian Hoffmeister,

BSC on TÁR, working with director Todd Field and Cate Blanchett

0:00 0:00

Pelican 1615AirTP Wheeled Hard Case with TrekPak Divider Insert System (Black)

SKU | 016150-0051-110

Expected Delivery -

This iteration of the black Pelican 1615AirWD Wheeled Hard Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the lined 1615 case with a divider system insert designed by TrekPak that allows you to customize the organization of your gear and update it as your gear changes over time.
Original price $481.95 - Original price $481.95
Original price
$481.95
$481.95 - $481.95
Current price $481.95

Order Now:

Financing:

$43.50 / month

Price Match

What's in the

?

Genuine Expert Advice |

Send us an

about this product or anything else

OVERVIEW

  • Waterproof, Crushproof & Lightweight
  • 29.6 x 15.5 x 9.4" Interior Space
  • Made of Super-Light HPX2 Polymer
  • Updated Push-Button Latching System
  • Customizable TrekPak Divider Insert
  • Retractable Pull Handle & Wheels
  • IP67 Watertight O-Ring Gasket
  • Automatic Pressure Release Valve

This iteration of the black Pelican 1615AirWD Wheeled Hard Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the lined 1615 case with a divider system insert designed by TrekPak that allows you to customize the organization of your gear and update it as your gear changes over time.

Pelican 1615AirNF Wheeled Hard Case with Liner, No Insert (Black)

The waterproof 1615AirNF Wheeled Carry-On Hard Case in black from Pelican is a crushproof case made from lightweight HPX2 polymer that will protect and store sensitive gear. The case is secured with an updated push-button latching system on three sides that uses compressive force to tightly clamp the case shut. This edition of the 1615Air comes lined but without foam or other inserts, allowing you the freedom to completely customize the roomy 29.6 x 15.5 x 9.4" interior to your specific needs and gear. Carry your case using one of the three overmolded handles or if it's too heavy, extend the pull handle and tow it behind you on its two low-profile, quiet-running wheels.

Your case is made of a super-light proprietary HPX2 polymer with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. Case design features include an O-ring that seals it to an IP67-rating to make it dust and waterproof, dual 5/16" (8mm) diameter stainless steel-reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. For easy identification, there's a polycarbonate card holder that may be placed on the front or side of the case.

As with all bags and cases, check with your specific airline for the exact measurements of what they consider "carry-on" luggage before your flight.

TrekPak Divider Kit for Pelican 1615 Air Case

Save space and reduce weight while organizing your gear to perfection with the TrekPak Divider Kit for Pelican 1615 Air Case. TrekPak uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. The 7/16" thick divider sections are made of waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360° protection.

Your TrekPak Divider Kit includes two 30" dividers, two 16" dividers, two perimeter pieces, top and bottom foam, 30 pins and tabs, and a cutter tool.

Note: The middle inserts may require some cutting with the included cutter tool to better fit into the case.

SPECS

Pelican 1615AirNF Wheeled Hard Case With Liner, No Insert (Black) Specs

Carry/Transport Options Handle, Retractable Handle, Wheels (Built-In)
Color Black
Type of Closure Latch
Interior Type Empty
Security Lock Accepts Padlock
Environmental
Water Resistance Waterproof
Maximum Buoyancy 169.2 lb / 76.7 kg
IP Rating IP67
Operating Temperature -20 to 140°F / -29 to 60°C
General
Maximum Volume 2.5 ft³ / 0.07 cm³
Materials Exterior: Polypropylene
Dimensions Exterior
32.6 x 18.4 x 11" / 82.8 x 46.7 x 27.9 cm
Interior
29.6 x 15.5 x 9.4" / 75.2 x 39.4 x 23.9 cm
2" / 5.1 cm (Lid Depth)
7.4" / 18.8 cm (Base Depth)
Weight 14.1 lb / 6.4 kg
Packaging Info
Package Weight 17.4 lb
Box Dimensions (LxWxH) 33 x 19 x 11.3"

TrekPak Divider Kit For Pelican 1615 Air Case Specs

Divider Adjustability Locking Pins
Material Foam, Plastic
Packaging Info
Package Weight 6 lb
Box Dimensions (LxWxH) 48.3 x 18.3 x 4.1"

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare