Miller CX10 Sprinter II 2-Stage Alloy Tripod System with Ground Spreader

(No reviews yet) Write a Review
Usually ships in 7-10 business days
22.00 LBS
Adding to cart… The item has been added

Product Overview


  • CX10 100mm Fluid Head, 26.4 lb Payload
  • 1580G Sprinter II 2-Stage Alloy Tripod
  • Self-Adjusting Ground Spreader
  • 16mm Fixed-Length Pan Handle
  • Arrowx 2-Stage Soft Case
  • 15+0 Steps of Counterbalance
  • 5+0 Steps of Pan and Tilt Drag
  • 17.3 to 60.4" Working Tripod Height
  • High-Speed Independent Dual Leg Locks

The CX10 Sprinter II 2-Stage Alloy Tripod System with Ground Spreader from Miller provides the stability of a 100mm ball fluid head and a flexible ground spreader that self-adjusts to uneven surfaces. The included CX10 fluid head supports up to 26.4 lb payloads and offers 15+0 steps of counterbalance and 5+0 steps of pan and tilt drag. With counterbalance, pan, and tilt all capable of being set to zero, even the most compact and lightweight cameras can be swapped in when necessary. The 1580G Sprinter II 2-stage aluminum tripod legs feature three leg sections and are adjustable between 17.3 to 60.4" of working height. The system is complete with a pan handle and a soft carry case.

Miller CX10 Fluid Head

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 26.4 pounds, adequate for small cinema cameras with rigs or medium sized ENG camcorders. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX10 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX10 will perform reliably. The base of the CX10 is a 100mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX10 in dark environments. A fixed length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller Sprinter II 2-Stage Alloy Tripod (Ground Spreader Ready)

The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.

Miller 470 Ground Spreader for Sprinter II Tripod Legs

The Miller 470 Ground Spreader works with all Sprinter II tripod legs. The spreader features pullover rubber stirrups that securely hold your tripod's feet, holding your legs fast while providing grip on hard surfaces. Once mounted, you can adjust the length of each of the spreader's arms individually as needed without detaching the spreader from the tripod. The spreader's flexible construction enables your tripod to remain stable on flat or uneven terrain. A pull ring in the center of the spreader helps fold the spreader up into your tripod when you close the legs.

  • Suits all Sprinter II single- and two-stage tripods
  • Telescopic arm extensions
  • Flexible spreader consturction makes it suitable for flat and uneven terrain

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.


Miller CX10 Fluid Head

Camera Plate
Camera Plate Features Sliding Balance Plate
Balance Plate Sliding Range 2.4" / 6 cm
Tripod Platform
Base Mount 100 mm Half Ball
Pan & Tilt
Drag Control Pan: 5-Step Plus 0
Tilt: 5-Step Plus 0
Vertical Tilt +90° to -75°
Load Capacity 0 to 26.4 lb / 0 to 12 kg
Counter Balance Incremental 15-Step Plus 0
Dimensions 6" / 15 cm
Weight 5.3 lb / 2.4 kg
Packaging Info
Package Weight 8.95 lb
Box Dimensions (LxWxH) 17.9 x 12.3 x 12.3"

Miller Sprinter II 2-Stage Alloy Tripod (Ground Spreader Ready)

Head Mount Type 100 mm Bowl
Load Capacity 100 lb / 45 kg
Maximum Working Height 60.4" / 153 cm
Minimum Working Height 17.3" / 44 cm
Folded Length 27.6" / 70 cm
Materials Aluminum
Weight 8.3 lb / 3.8 kg
Leg Sections 3

Miller 470 Ground Spreader For Sprinter II Tripod Legs

Type Ground Spreader
Adjustable Yes
Footprint Diameter 35.83 x 51.57" / 91 x 131 cm
Transport Length 17.52" / 44.5 cm
Weight 1.3 lb / 589.7 g
Packaging Info
Package Weight 2.115 lb
Box Dimensions (LxWxH) 18.4 x 7.25 x 6.85"

Miller Arrowx Softcase 2 Stage For Sprinter II And Toggle 2 Stage Tripod Systems (Black)

Material Ballistic nylon outer shell
Type of Closure Zipper
Padded Yes
Carrying/Transport Options Dual top handles and padded end handle
D-links for optional, user-supplied shoulder strap
Back pack straps
Dimensions 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm
Weight 9.7 lb / 4.4 kg
Packaging Info
Package Weight 12.68 lb
Box Dimensions (LxWxH) 39 x 13.75 x 12"


(No reviews yet) Write a Review

Need Something? Contact us!

Phone: (323) 230-3589  Email: