Convert a plunger style filter tray into a gripper tray with the Gripper Module. Easily load or unload filters even while wearing gloves. Additional information Dimensions 7 x 7 x 1 cm

For Zeiss Standard and HS (Super Speed) lenses  Compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25.

For Ultra Prime 16-135 mm, Leica Summilux and Summicron  Compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25.

(1) x 15 mm dual-rod mount adapter - ARRI LMB 4x5 15 mm LWS Console(1) x mounting adapter - ARRI LMB Accessory Adapter(1) x filter holder - ARRI LMB 4x5 Extra Rotatable Filter Stage(1) x filter holder - ARRI LMB 4x5 Extra Non-Rotatable Filter Stage(1) x...

HIGHLIGHTS 1 x 2-Filter Stage, 1x 1-Filter Stage Three 4 x 5.65" / 4 x 4" Filter Trays Carbon Fiber Top/Bottom Flag Required Lens Clamp Not Included DESCRIPTION  The LMB 4x5 3-Stage Clamp-On Set from ARRI includes the...

HIGHLIGHTS 1x Rotating, 2x Fixed Filter Stages 15mm Lightweight Rod Support Carbon Fiber Top/Bottom & Side Flags Swing-Away / Tilt Arm Module Spherical & Anamorphic Matte Sets Rubber Donut Fits Lenses 62-143mm O.D. Five 4 x 5.65" / 4 x 4" Filter...

SPECS Package Weight 0.15 lb Box Dimensions (LxWxH) 3.9 x 2.0 x 0.5"

Description The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweightmatte box such as the ARRI LMB-25. The frame has the width of two 4” x 5.65”filter frames and fits into a 2- or 3-filter stage. A safety mechanism...

Description The diopter stage can be used at the back of a 4 inch x 5.65 inch clip-on a mattebox, or independently with a rear-mounted clamp adapter. Diopters up to +3 canbe fitted, and the position of split diopters can be adjusted with an...

2-part bellow ring (R1) designed to follow the tilt movement of the SMB-1. Compatible with all R8 screw-on rings (and R4 screw-on rings via K2.66095.0) 6” tilting filter ring A special rubber filter ring has been designed to accompany the matte box...

This Kit with Four 2-Stage Zip Boxes & Adapter Rings (4 x 5.65") from Wooden Camera is composed of four clamp-on matte boxes sized to fit lenses with 80-85mm, 90-95mm, 100-105mm, and 110-115mm front diameters. If you're working...

For OConnor O-Box WM Matte Box For 110mm Lens to Adapt to Matte Box Requires Additional Bellows Ring The OConnor Reduction Ring (114-110mm) enables using a lens with an outside front diameter of 110mm to fit into a Matte Box WM equipped...

O-Box WM Matte Box Wide Mini Sunshade / Top Flag Two 4 x 4" Filter Frames Two 4 x 5.65" Filter Frames 15mm LWS Rod Bracket The OConnor O-BOX WM Set (15mm LWS) is a package that includes the O-Box WM matte box, a wide mini sunshade, top...

Threaded Donut Ring for O-Box Matte Box Supports 104mm to 55mm Diameter Lenses Aircraft Grade Aluminum Exterior High-Tech Composite Flex Interior The OConnor Universal Ring 114-55 Threaded is an aircraft grade aluminum donut ring for...

For Lenses with O.D. Between 80 and 85mm Rubber Shade with Stainless Steel Clamp Clamps Directly on Lens Supports a Single Filter The Wooden Camera Zip Box holds one 4 x 5.65" filter and is useful for handheld, stabilized, and drone...

This Hard Mask Set is designed for the MB-14 Mattebox, and includes six different sizes ranging from 18mm to 180mm. Fits straight into carrier and sunshade.  

MMB-2 Flexible Connection Ring 77

For Matte Box with 114mm Rear Opening For Lenses with 77mm Filter Thread Rear Projecting 114mm Clamping Surface For Bright Tangerine Black Hole Adapter   This 77 to 114mm Threaded Adapter Ring for Clamp-On Matte Box from Bright...

For Matte Box with 114mm Rear Opening For Lenses with 67mm Filter Thread Rear Projecting 114mm Clamping Surface For Bright Tangerine Black Hole Adapter This 67 to 114mm Threaded Adapter Ring for Clamp-On Matte Box from Bright...

__Stackable filter stage for two filter frames (rotatable as pair) with geared frame drive and two integrated, independent filter / tray catchers. Includes K4.47074.0 (6.6" x 6.6" filter frame, non-geared) and K4.47076.0 (6.6" x 6.6" filter frame,...