Composed of three smaller DS1 lights, the DS3 LED Modular Light Basic System from Digital Sputnik features 0-100% flicker-free dimming, 1,500-10,000K with +/- green tint, full RGB and primary color rendering. The lights can be controlled remotely via Wi-Fi with a separately available Wi-Fi Control Module or via DMX with a separately available DMX module. Each light draws 140 watts of power and connects to the single DS3 power supply with a long, 30' cable. The included power supply works on 90-260 VAC for international use. Thanks to factory calibration and setup, the DS3 system is ready-to-use right out of the box.
The DS3 Basic System includes a cardboard storage box, 3 DS Light Module RGBWs, 3 DS3 30' cables, DS3 PSU, 3 DS Eccentric Locks, AC Cabel IECLock 3', and a limited 3-year warranty.
DS3 Configurations
This DS3 is a Basic configuration that functions as a starter system for location lighting or fixed installations.
Factory Calibration
Light modules have been factory calibrated with a profile saved into each module.
Advanced Thermal Management
Microprocessor controlled cooling solution using passive and active cooling for maximum efficiency.
Updateable
Software based architecture allows for over-the-air software updates.
Live Monitoring
Real-time two-way communication with light module for health, temperature and usage monitoring.
Modular Design
Paneling of light modules and power supplies makes it easy to build higher output light fixtures and custom solutions.
Precision Dimming
16-bit, 4 channel high precision dimming allows for billions of possible effective color combinations. Proprietary 4 channel HSL controls allow to dim the light with the exact mixture of white balance and tint.
Advanced Color Science
Constant color coordinates through the dimming range using high precision multi-dimensional LUTs
Super Luminous
RGBW module has comparable output to 100W HMI or 500W Tungsten from an extremely small 1.3kg/2.8lbs unit.
Raw Processing Power
High color precision and flicker free dimming is made possible by microprocessor software and a unique hardware current control system.
Upgradeable
The LED board inside the fixture is upgradeable, allowing for easy and affordable updates in the future.
Digital Sputnik DS1E specs
Rating
CQS (Color Quality Scale) at 3,200K CQS = 85 (10%), 80 (100%) at 5,600K CQS = 86 (10%), 82 (100%)
Color Range
1,500-10,000K with option to change tint (+/- green)
Operating Voltage
90-260 VAC
Temperature Range
Ambient: 0ºF ~ 115ºF/-20ºC ~ 45ºC
Power Draw
Per LED Module: 140 W per light module (100 W per light module in 100% 5600K) Maximum Power Draw 420 W (300 W 100% 5600K)
Beam Angle
20 degrees
Dimming
0-100% Flicker-free dimming
Cable
30' / 10 m cable between power supply and light
Dimensions
Overall: 16.5 x 15.7 x 9.1" / 42 x 40 x 23 cm Single Light Module: 4 x 4" / 11.6 x 11.6 cm
Weight
Total: 26.5 lb / 12 kg Single Light Module: 2.8 lb / 1.3 kg Power Supply: 7.7 lb / 3.5 kg
Equivalent to a Flooded 4K HMI Fresnel 1500 to 10,000K with +/- Green Tint Rotating Light Columns for Focusing 0-100% Flicker-Free Dimming Full RGB with Primary Color Rendering 840 Watts at Full...
Range of Accessories & iOS Device Wi-Fi 1,500-10,000K with +/- Green Tint 0-100% Flicker-Free Dimming Full RGB with Primary Color Rendering 140 Watts Per Light Wireless Wi-Fi Control 30' Cable...
4 x 4" RGBW LED Module Full Color Control; Primary Color Output Completely Modular System Color Temperature: 1500-10,000K Beam Angle: 20° Dimming from 0-100% Local Controls and OLED Screen PSU...
OVERVIEW For Digital Sputnik DS 1, DS 3, DS 3+ Connects Light Fixture to Power Supply Cable Diameter: 0.3" This DS Light Module Cable is a 65.6'-long cable that allows you to move...
OVERVIEW Holographic Diffuser Set 2x1', 2x2', 2x3', 3x1', & 3x3' Diffusers 34 & 76 Degree Beam Angles Change the beam angle of your LED light with the Five-Piece Holographic Diffuser...
Range of Accessories & iOS Device Wi-Fi 1,500-10,000K with +/- Green Tint 0-100% Flicker-Free Dimming Full RGB with Primary Color Rendering 140 Watts Per Light Wireless Wi-Fi Control 30' Cable...
Equivalent to a Flooded 4K HMI Fresnel 1500 to 10,000K with +/- Green Tint Rotating Light Columns for Focusing 0-100% Flicker-Free Dimming Full RGB with Primary Color Rendering 840 Watts at Full...
4 x 4" RGBW LED Module Full Color Control; Primary Color Output Completely Modular System Color Temperature: 1500-10,000K Beam Angle: 20° Dimming from 0-100% Local Controls and OLED Screen PSU...
OVERVIEW
*NOTE: EACH LAMP COMES WITH A POWER CABLE"
With the Quasar Science Q-LINE X Crossfade Linear LED Lamps (25 Watt 2ft) , you can tune the lamp from 2000° Kelvin Candle Light all the way...
*NOTE: These mounting clips are for T-12 tubes and they are not compatible with T-8 tubes.* OVERVIEW T12 - Mounting Clip for Q Line Used in Framed Arrays Can be screwed into the wall to mount a...
OVERVIEW
*NOTE: EACH LAMP COMES WITH A POWER CABLE*
With the Quasar Science Q-LINE X Crossfade Linear LED Lamps (50 Watt 4ft) , you can tune the lamp from 2000° Kelvin Candle Light all the way...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
