- 96Wh Lithium-Ion
- For Sony FS5, FS7, PMW Series Cameras
- Built-In D-Tap Advanced Output
- Built-In D-Tap Output, USB Output
- 4-LED Power Gauge
- Charges in IDX Chargers
- Over-Charge, Over-Discharge Protection
- Overcurrent Protection at High Loads
This 96Wh IDX 14.4V Li-Ion Battery for Sony BP-U Mount Cameras provides power for your Sony FS7, FS5, and PMW-series cameras. It incorporates a USB port and D-Tap Advanced power port which can be used for powering your accessories. A four-LED gauge indicates the charge state of your battery. The battery's internal circuitry provides over-charge, over-discharge, and high load overcurrent protection.
- This battery is compatible with and powers Sony FS5, FS7, and PMW-series cameras.
- It incorporates a USB port, D-Tap port, and D-Tap Advanced power port which can be used for powering your accessories.
- The D-Tap Advanced port is compatible with D-Tap plugs for power output. However, with a compatible charger (not included), you can charge the battery via the D-Tap Advanced port.
- Charging your battery via the standard D-Tap is not recommended.
- The USB output port is not a data port and is only for power. It provides 5V at 2.3A. It is an A-type connector and becomes active when you push and hold the CHECK/USB ON button for longer than three seconds. It will turn off once the cable has been removed or no power has been drawn for more than 30 minutes.
|Mount / Series Type||Sony BP-U Series|
|Capacity (Wh)||96 Wh|
|Output Voltage||14.4 VDC|
|Maximum Load||70 W, 6.4 A|
|Accessory Port||1 x D-Tap Advanced |
1 x D-Tap
1 x USB
|USB Output||5 V, 2.3 A|
|Charging Voltage||16.8 VDC|
|Storage Temperature||-4 to 122°F / -20 to 50°C|
|Charging Temperature||32 to 104°F / 0 to 40°C|
|Discharging Temperature||-4 to 113°F / -20 to 45°C|
|Dimensions (W x H x D)||1.6 x 4.1 x 2.7" / 41.5 x 104.6 x 69.5 mm|
|Weight||0.5 lb / 226.8 g|
|Package Weight||1.25 lb|
|Box Dimensions (LxWxH)||4.7 x 3.2 x 2.1"|