Extra long clampThis longer clamp allows extra reach and maneuverability.

__Arri (K0.60210.0) Pro Set 15 mm Reduction Insert. The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods.

When you need to clamp onto a support at odd angles, the Double Ball Joint Head provides the solution._Twin swiveling 5/8" spigots and single lever lock. Height: 5.7" (14.5 cm) without camera mount plate.

To extend handgrip parallel to camera body.__(measurement from end to end: 195 mm) (2x)

The All-New XTENDER 2 SHOT KIT_(200 Series) features the totally updated X-MC-200 Straight Arm. _This new arm is stronger and has the ability to micro adjust and lock the tension. This kit is recommended for ENG or Mid Size Cameras.This arm is great for...

The Xtender X-FMOA-10 Friction Mount Offset Adapter is designed for accessories that have access ports directly underneath the unit. It allows you to mount the accessory slightly in front of or just behind the mount.

PRODUCT HIGHLIGHTSConnects Arm to Shoe Mount AccessoryConverts Camera Thread into Shoe MountIncludes Removable Stop Screw_The_Xtender CSR-10 Shoe Receiver_connects the upper portion of the Xtender articulating arm to a shoe mount accessory. By converting...

  Unique to Kupo, the 4 Way Clamp quickly mounts around any tubing sized from 1.4 – 2.0" (35 – 50mm) and has four recessed mounting positions that accept a series of interchangeable accessories and can support loads up to 66 lbs (30 Kg).

The All-New XTENDER LIVE AT 5 KIT_(200 Series) features the totally updated X-SA-200 Straight Arm. _This new arm is stronger and has the ability to micro adjust and lock the tension. This kit is recommended for ENG or Mid Size Cameras.This arm is great...

PRODUCT HIGHLIGHTS Attaches to P100 LightMagnetic Mount for AccessoriesSupports Dome Diffuser or Gel HolderWorks with P180 BarndoorsThe_P100 2-in-1 Accessory Mount_from_Fiilex_is designed to adapt the P100 to accept the Fiilex Dome Diffuser and Gel...

__Arri K2.65269.0 (K2652690) Rosette Adapter, RA-2 (pair) for attaching at the cage system

The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts...

$20.00 Online Rebate available until June 30, 2015.Claim online rebate here: www.rapid-rebates.com/macgroup The Kupo Junior Roller Stand is the perfect compliment to a boom set-up. The Junior Roller Stand is a great lightweight alternative to a...

The Suction Mount with Shoe Adapter from Xtender can be configured to accept most shoe mount or 1/4"-20 accessories. The 4-5" Woods Pwer-Grip suction allows you to mount it to most flat non-porous surfaces. The suction mount comes...

Arri 15mm adapter for Sony PMW-F5 and PMW-F55 camcorders.__The 15 mm Studio adapter is a substitution to the existing parts between the 15 mm studio rod bracket of the Bridge Plate Sled BPS-1 (The optional sliding baseplate of the Quick Release HD plate...

Quick BitsOverview Hot Shoe 15mm Clamp for attaching a single sideways 15mm rod to a camera hot shoe. Ideal for attaching our_UVF Mount v2 (No Clamp).

The_Manfrotto Double Articulated Arm_has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads -- up to_11 lbs._Its extendable sliding arm system extends up to 34 inches in length, and features a...

PRODUCT HIGHLIGHTSUsed to Connect Arm/Mic Clip to CameraConverts Camera Shoe to 1/4"-20 Mount_The_Xtender CSM-20 Shoe / Microphone Mount_connects the Xtender articulating arm to your camera's shoe mount. With the mount, you can fit in a 5/8" threaded mic...

The_XL-MM-20 Dual Tightening Monitor/Light Attachment_from_Xtender_is designed to attach to 1/4"-20 female threaded fixtures. It locks into the upper arm of the XTENDER which allows you to attach 1/4"-20 accessories such as Zylight, Lite Panel, Zoom,...