Product Overview
OVERVIEW
- Pull Focus Using Ronin-SC Gimbal
- Works with Ronin-SC Focus Wheel
- Low-Noise Design
- 0.8 MOD Gear and Gear Belt
Pull focus while balancing your camera on the Ronin-SC gimbal with this Focus Motor from DJI. Designed specifically for use with the Ronin-SC, the motor features a standard 0.8 MOD gear, a gear belt to affix around your camera lens, and a 12mm rod and rod clamp to mount onto your Ronin-SC.
The motor comes with an RSS splitter to connect it to the camera and the camera control port, so you can use the Ronin-SC focus wheel to remotely control your camera's focus.
SPECS
| Maximum Torque | 0.2 Nm |
| Maximum Speed | 100 rpm |
| Gear | Motor: 0.8 MOD, 40 Teeth Gear: 0.8 MOD, 151 Teeth |
| Operating Current | Free Current: 50 mA, 5 V Stall Current 1.2 A, 5 V |
| Operating Voltage | 5 V |
| Noise | 25 dB |
| Rod Support | 12 mm |
| Operating Temperature | -4 to 113°F / -20 to 45°C |
| Dimensions | Motor: 2.8 x 1.9 x 1.3" / 71 x 47 x 34 mm Gear Diameter: 1.2 x 4.3" / 30 to 110 mm Gear Length: 14.8" / 37.7 cm |
| Weight | 3.1 oz / 88 g |
