OVERVIEW This Backstage 3" Cable Holder for Cart MAG-CH3 helps you organize your shoot. Wires and cables can be dangerous when they are laid haphazardly around the set. The 3" Cable Holder for Cart MAG-CH3 safeguards against tripping...

OVERVIEW This iPad Mini holder is a cradle style mount that has a tilt and swivel feature on the back. It is a high quality custom made holder with a neat and discreet design. Easily slide your iPad Mini in/out of the holder. With this iPad Mini holder...

OVERVIEW This is a baby pin that quickly and securely locks into the 1" seat and push bar receivers on Fisher and Chapman dollies. These Pins are great for locking off cameras, mounting lens flags, or using as attachments to connect two dollies on...

OVERVIEW The Mag Laptop Tray is made of 3/16" aluminum with 1/4" hole every one inch to help in dissipating heat from your Laptop. This item has an opening in the rear to run your cables through and a stop bar at the bottom edge to help...

OVERVIEW This Magliner Laptop Swing Arm is a great way to maximize your space for practical and efficient shooting. Simply attach the steel swing arm to your cart and insert the 5/8" baby arm into the Mag Laptop Tray. You'll then be able to...

OVERVIEW The Mag U-Handle Offset Baby Pin (Offset) was designed to to work together with the Mag Lap Top Tray and the Mag Lap Top Tray Swing Arm as seen in the inset image. It allows the user to adjust the height and...

OVERVIEW The Backstage Dual Tripod Holder for Camera Cart fits on the two vertical posts and holds all standard professional 35mm motion-picture camera style tripods. The tripod hook assembly is mounted on top of the dovetail assembly. The unit also...

OVERVIEW This Magliner Foldable Cup Holder mounts and locks on the outside lip of any Filmtools' Converted Cart or Magliner shelf. It also keeps you hydrated on those hot, exterior shoot days. Lack of hydration is the most dangerous thing...

OVERVIEW This Backstage 6" steel hook fits all Backstage Upper Shelves designed for Magliner carts. SPECS Part No: MAG-CH6 Material: Steel

OVERVIEW DigiClamps keep your laptop secured to the DigiPlate. The cheese plate design allows the clamps to be positioned to allow just about any laptop to be used with the DigiPlate. Each clamp is secured to the DigiPlate using large thumb screws...

Dimensions: L9" x W5" x H3"

OVERVIEW The Backstage TR-04 Snap-On 5/8" Baby Pin can be attached to Backstage upper shelves for greater customizability and versatility. The baby pin can be used to secure compatible attachments such as grip heads and offers aluminum strength...

Dimensions: L 5" x W 5" x H 52" 5/8” Snap-On Pin not included

OVERVIEW This Backstage Mitchell Mount is made just for the TR-04 Camera Case Cart. It weighs 6.65 pounds and will support a Panahead and fully dressed Panaflex. Note: This mount also includes the two pins needed to mount your front box onto

Description The Stand Holder is designed to work with American Grip stands that have a Hanger Pin installed. However, this product works with most stand manufacturers that use Hanger Pins. - Fabricated 5052 aluminum- black anodized SPECS Dimensions: 3...

Description The Stand Holder is designed to work with American Grip stands that have a Hanger Pin installed. However, this product works with most stand manufacturers that use Hanger Pins. - Fabricated 5052 aluminum- black powder coated   SPECS...

OVERVIEW Backstage 24" Cross Bar for Camera Case Cart *NOTE: 5/8" Snap-On Pin Not Included) SPECS Dimensions: L5" x W5" x H 24"

The Sidewinder provides perfect horizontal movement of monitors and laptops with adjustable tension in each joint. For mobile environments the joints can be set so that they are tight and secure. For office environments, the joints are loosened for...

The bottom receiver allows for users to reposition accessories that use a bottom receiver to another side of the cart. Systems such as their Camera Mount and Steadicam System come by default with a bottom receiver that is setup for the swivel wheel side...

Compatible With Scout 31Inovativ designed this system based on the needs of Steadicam operators around the globe. Complete with a 1.75__ mast, bumper, bottom receiver, accessory Cross Bar bracket, and adjustable vest mount.