Use the Right Side Plate from Wooden Camera to increase your options for mounting accessories to your WEAPON, EPIC, SCARLET, or RAVEN DSMC2 camera. This plate includes one ARRI rosette for attaching a handgrip, plus multiple 1/4"-20 mounts (in standard RED spacing), and two 3/8"-16 ARRI accessory mounting holes with locating pin holes. The L-shaped Right Side Plate is constructed of sturdy, lightweight aluminum. No need to worry about misplacing screws when using this plate, as it attaches via four captive M3 screws.
Compatible RED Cameras
WEAPON
EPIC WEAPON (EPIC-W)
SCARLET-W
RAVEN
Additional Features
Multiple rows of 1/4"-20 threaded mounting holes, and two 3/8"-16 ARRI accessory mounting holes with locating pin holes
Can be used for mounting a handgrip and/or other accessories
Plate is designed to fit to the right side of the camera and attaches via four captive screws
Description The Side Plate (VariCam LT) attaches to the right side of the camera by (3) 1/4-20 screws and has rows of 1/4-20 holes in standard spacing and the ARRI accessory mount also available in...
*NEW ITEM* COMING SOON Master Top Handle (RED DSMC2) attaches in two places to both the Easy Top (Weapon) and the Pass Through Top Plate (Weapon) by four 1/4-20 screws, making it extremely secure...
Quick Riser (Epic, Scarlet) is a quick release riser baseplate for RED Epic and RED Scarlet cameras. It attaches by two low profile screws to camera bottom and allows attachment of all original...
OVERVIEW 1/4"-20 and 3/8"-16 Threaded Holes 3/8"-16 ARRI Accessory Mounts 3-Pin Interface for Trigger Handle The Short Pass-Through Top Plate for RED DSMC2 from Wooden Camera attaches to the top of...
Top plate for RED Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and...
OVERVIEW
8K Full-Frame CMOS Sensor
8192 x 4320 Recording up to 60 fps
REDCODE RAW, ProRes, and DNx Recording
High-Speed Recording up to 300 fps in 2K
Bundling high performance raw video...
DESCRIPTION The Handgrip Relocator for the Panasonic EVA1 allows for the original Panasonic control handle to be attached to an ARRI Rosette. The kit also includes a LANC extension cable plus cable...
The Sachtler Sandwich Touch and Go Adapter with Touch & Go Plate 16 allows retrofitting other heads or equipment with the Touch & Go quick-release system that is compatible with...
Overview Designed for Use with Optional Core Unit Use with Core Unit as 15mm LWS Baseplate Vertical Rod Port (Lens Adapter Support) Center Camera Slot for Multiple Screws Anti-Twist, Non-Slip...
HIGHLIGHTS Adapts MFT Mount to PL Cine Lens Removable Foot with 1/4"-20 Socket 7-Shim Set for Back Focus Calibration PL Port Cap Included DESCRIPTION The MFT to PL Mount...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
