DSMC2 REDVOLT EXPANDER
- Usually ships in 3-5 business days
- 5.00 LBS
Designed for advanced configurations, the DSMC2__ REDVOLT_ Expander mounts directly to the BRAIN_ and offers an expansive array of I/O connectors and functionality for the DSMC2 camera system.
The DSMC2_REDVOLT_Expander features ports for power in (DC IN), Genlock (BNC), Timecode (LEMO),_GIG-E, and more._HDMI_and two 3G-SDI_(HD-SDI) outputs offer versatility for your video output needs, while an integrated_USB_power output is available to support wireless_HDMI_transmitters.
The DSMC2_REDVOLT_Expander offers a removable audio module with two standard_XLR_connections for most professional audio needs. Each_XLR_input features a 3-position selector switch to designate the incoming audio signal type: Balanced Line Level, Balanced Mic Level, and Balanced Mic with +48V phantom power. Additionally, a 3.5mm line-level headphone jack lets you sample audio during takes and in playback mode.
The DSMC2_REDVOLT_Expander also provides multiple auxiliary power outputs, enabling the use of peripheral camera accessories and more:
A rear-facing 4-Pin 0B_LEMO_AUX_PWR_output supports Start/Stop Trigger IN, Tally_OUT, and provides power out up to 1.5 Amps.
__ A front-facing 2-Pin 0B_LEMO_AUX_PWR_port provides power output up to 3.0 Amps.
__ A front-facing 7-Pin 0B_LEMO_SERIAL_port provides power output up to 1.5 Amps. The_SERIAL_port is ideal for connecting to lens motor drivers.
__ A rear-facing Timecode port offers 5V at 200 mA for powering external timecode devices.
__ A rear-facing_USB_port offers 5V at 1.5 Amps for powering_HDMI_transmitters or small mobile devices.
__ The two 3-Pin_XLR_audio ports in the audio module each offer +48V phantom power.
For hot-swap support when it matters most, the DSMC2_REDVOLT_Expander also supports a singleREDVOLT_battery. Additional DSMC2-compatible batteries and power modules can be mounted for your changing power needs.
The DSMC2_REDVOLT_Expander also features a selector switch that enables the_BRAIN_to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the_BRAIN_on and off when the camera is mounted in remote or difficult to maneuver locations. This expander is the ideal solution for a variety of production environments, maximizing camera interface and functionality for the most demanding shoots.
NOTE:_Only one (1) expander module can be used at a time.
|DIMENSIONS||Height: 4.57 in. (116.0 mm) |
Width: 5.14 in. (130.5 mm)
Depth: 3.63 in. (92.4 mm) (connected to_BRAIN)
|WEIGHT||Approx. 2.20 lbs (997.9 g)|
|BRAIN_MOUNTING||4x M4 captive mounting screws|
|ADDITIONAL_MOUNTING||18x 1/4-20 mounting points|
|BRAIN_CONNECTIONS||Power delivery via Rear pogo connector (13-Pin) |
Communication via Rear I/O connector (4_40 Pin)
|CONNECTORS||DC IN (6-Pin 1B_LEMO_socket) |
HDMI_1.2 output (Type A socket), 60 Hz max frame rate
USB_Power output (Type A socket), 1.5 A
3G-SDI_output (75 __BNC), 60 Hz max frame rate
Genlock input (75 __BNC)
Gigabit Ethernet input/output (9-Pin 0B_LEMO)
CTRL_(Tally_OUT_/ RS-232 Rx and Tx) (4-Pin 00BLEMO)
Stereo Headphone output (3.5 mm jack)
Timecode input/output (5-Pin 0B_LEMO)
2x Balanced Audio inputs (3-Pin, full size_XLRfemale)
Aux Power_OUT_/ Trigger IN / Tally_OUT_(4-Pin 0BLEMO), 1.5 A
Aux Power Output (2-Pin 0B_LEMO), 3.0 A
|AUTO_BOOT_ON_POWER||2-position slider switch|
|REAR_BATTERY_MODULE_CONNECTION||Power delivery via Rear pogo connector (13-Pin)|
|AUDIO_1||2 channel, uncompressed, 24-bit, 48 KHz |
Input Formats: Balanced Line, Balanced Mic (w/o Phantom Power), Balanced Mic (w/ 48 V Phantom Power)
|OPERATING_TEMPERATURE||0_C to 40_C (32_F to 104_F)|
|STORAGE_TEMPERATURE||__20_C to 50_C (__4_F to 122_F)|
|OPERATING_HUMIDITY||0% to 85%, non-condensing|
|STORAGE_HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE_REQUIREMENT||Compatible with all DSMC2 firmware v6.2.55 or later|