null

Wooden Camera D-Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount)

(No reviews yet) Write a Review
$1,295.00
SKU:
233900
Availability:
Usually ships in 3-5 business days
Weight:
1.00 LBS
Adding to cart… The item has been added

Product Overview

Quick Bits

*NEW ITEM* COMING SOON

D-Box Connections:

1. _ D-Tap - 12V Unregulated
_ _ _ _ -_This slot can be swapped for_Hirose,_2pin LEMO, or_4pin LEMO

2. __D-Tap - 12V Unregulated
_ _ _ _ -_This slot can be swapped for_Hirose,_2pin LEMO, or_4pin LEMO

3. _ 2 pin LEMO - 12V Unregulated
_ _ _ _ - ARRI standard wiring

4. _ 2 pin LEMO - 12V Unregulated
_ _ _ _ - ARRI standard wiring

5. _ 3 pin Fischer - 24V Regulated
_ _ _ _ - Regulator built in to convert battery voltage to 24V
_ _ _ _ - Maximum 3A shared between the two 3pin Fischers
_ _ _ _ - ARRI standard start/stop capabilities

6. _ 3 pin Fischer - 24V Regulated
_ _ _ _ - Regulator built in to convert battery voltage to 24V
_ _ _ _ - Maximum 3A shared between the two 3pin Fischers
_ _ _ _ - ARRI standard start/stop capabilities

7. _ USB - 5v Regulated
_ _ _ _ - Provides 2A for iPhone/iPad charging

8. _ DC Input - 12-16V
_ _ _ _ -_DC input on the D-Box is the same as the camera's LEMO
__ _ _ _- Priority is given to DC Input_to preserve battery charge when both sources connected



Overview

D-Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. The D-Box is completely tool-less for installation and_utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods.

Connectors on the D-Box are contoured to match the Expander Modules'_which allow for all cables to be installed with no collisions._The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an_AC power supply_orexternal power plate_to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged.

Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself_but we should note that_one D-Tap is obscured_by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included.

D-Box Connections:

1. _ D-Tap - 12V Unregulated
_ _ _ _ -_This slot can be swapped for_Hirose,_2pin LEMO, or_4pin LEMO

2. __D-Tap - 12V Unregulated
_ _ _ _ -_This slot can be swapped for_Hirose,_2pin LEMO, or_4pin LEMO

3. _ 2 pin LEMO - 12V Unregulated
_ _ _ _ - ARRI standard wiring

4. _ 2 pin LEMO - 12V Unregulated
_ _ _ _ - ARRI standard wiring

5. _ 3 pin Fischer - 24V Regulated
_ _ _ _ - Regulator built in to convert battery voltage to 24V
_ _ _ _ - Maximum 3A shared between the two 3pin Fischers
_ _ _ _ - ARRI standard start/stop capabilities

6. _ 3 pin Fischer - 24V Regulated
_ _ _ _ - Regulator built in to convert battery voltage to 24V
_ _ _ _ - Maximum 3A shared between the two 3pin Fischers
_ _ _ _ - ARRI standard start/stop capabilities

7. _ USB - 5v Regulated
_ _ _ _ - Provides 2A for iPhone/iPad charging

8. _ DC Input - 12-16V
_ _ _ _ -_DC input on the D-Box is the same as the camera's LEMO
__ _ _ _- Priority is given to DC Input_to preserve battery charge when both sources connected

Reviews

(No reviews yet) Write a Review

Need Something? Contact us!

Phone: (323) 230-3589  Email: email@hotrodcameras.com