RED DSMC2 V-LOCK I/O EXPANDER
- Usually ships in 3-5 business days
- 4.00 LBS
RED's ecosystem of original and third party accessories means an unprecedented level of personal customization is possible with every RED camera.
The DSMC2__ V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using_RED_BRICK__batteries.
The DSMC2__ V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using_RED_BRICK__batteries. Constructed from lightweight and durable magnesium, this expander module mounts directly to the rear of the camera BRAIN_ and offers connections for the following:
__ DC Power input (DC IN)
___HDMI_1.2 output (Type A socket)
__ 3G-SDI_output (HD-SDI, 75 __BNC)
___CTRL_&_SYNC_ports (2x 00B_LEMO_4-Pin, Timecode and Genlock support)
___AUX_Power output (P-Tap 2-Pin female)
___USB_Power output (Type A, 5 V at 1.5 A for powering_HDMI_transmitters or small mobile devices)
__ Stereo Headphone output (3.5 mm jack)
__ Stereo Analog input (3.5 mm jack)
The DSMC2 V-Lock I/O Expander also features a selector switch that enables the_BRAIN_to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the_BRAIN_on and off when the camera is mounted in remote or difficult to maneuver locations.
This expander is an ideal solution for a wide variety of production environments__from low-profile run-and-gun situations to studio shoots that require mobility.
NOTE:_The DSMC2 Top Handle is_NOT_fully compatible with the DSMC2 Base I/O V-Lock Expander, as the top handle will interfere with the battery when one is attached to the expander module.
DSMC2 V-Lock I/O Expander
|DIMENSIONS||Height: 4.57 in. (116.0 mm) |
Width: 4.94 in. (125.5 mm)
Depth: 2.25 in. (57.2 mm) (connected to_BRAIN)
|WEIGHT||1.0 lb (454 g)|
|BRAIN_MOUNTING||4x M4 captive mounting screws|
|BRAIN_CONNECTIONS||Power delivery via Rear pogo connector (13-Pin) |
Communication via Rear I/O connector (4_40 Pin)
|CONNECTORS||DC IN (6-Pin 1B_LEMO_socket) |
3G-SDI_output (75 __BNC), 60 Hz max frame rate
HDMI_1.2 output (Type A socket), 60 Hz max frame rate
SYNC_(Genlock IN / Timecode IN / Sync IN) (4-Pin 00B_LEMO_socket)
CTRL_(Tally_OUT_/ RS-232 Rx and Tx) (4-Pin 00BLEMO_socket)
USB_Power output (Type A socket), 1.5A
P-Tap Aux Power output (2-Pin), 3.0A
Stereo Analog Microphone input (3.5mm jack)
Stereo Headphone output (3.5mm jack)
|AUTO_BOOT_ON_POWER||2-position slider switch|
|AUDIO||24-bit, 48 KHz, uncompressed, unbalanced mic level|
|OPERATING_TEMPERATURE||0_C to 40_C (32_F to 104_F)|
|STORAGE_TEMPERATURE||__20_C to 50_C (__4_F to 122_F)|
|OPERATING_HUMIDITY||0% to 85%, non-condensing|
|STORAGE_HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE_REQUIREMENT||Compatible with all DSMC2 firmware v6.2.17 or later.|