Bright Tangerine Prodigy Air Deflector Compressor

OVERVIEW

• For Prodigy Air Head
• Shoot in Severe Weather Conditions
• Accelerates Air to 300+ mph
• Powered via 2-Pin LEMO Port
• Control via 3-Pin Fischer R/S Port
• Six 1/4"-20 & Three 3/8"-16 Threads
• Control Panel, USB Type-C Firmware Port
• Replaceable Air Filter

The Bright Tangerine Prodigy Air Deflector Compressor is the engine of the Prodigy Air Deflector. It filters and compresses the air, accelerating it to 300+ mph to keep debris off your camera lens to film in inclement weather conditions

Rugged and compact, it is easy to rig with threaded mounting points and tethers for safety wires. The control panel features large buttons to operate when wet or wearing gloves. Control from compatible hand units or remotes can be achieved via the 3-pin Fischer run/stop port. An integrated control panel with easy-to-use buttons is at the top of the device, and a USB Type-C port is also available for future firmware updates. Six 1/4"-20 threads and three 3/8"-16 on the sides of the compressor allow you to incorporate it into your gear configuration. A safety tether point enables the attachment of a safety wire for additional security.

Powered by 24V (2-pin Lemo), with R/S connectivity (3-pin Fischer).

Features

• Easy to rig using arms, rod brackets and clamps.
• Simple interface for operation with R/S connectivity
• Automatic Polarity Detection (24V/10A)
• Rugged housing and military-grade filtration
• Self-serviceable in the field or on location