Kupo

Overview Mount Tripod Head to Light Stand 1.7" Diameter Base with 3/8"-16 Screw Three Set Screws to Lock Down Head Interior Receptacle: 5/8" Exterior Diameter: 1-1/8" Easily mount a standard photo...

3.5" Long 5/8" Baby Stud w/ 1/4"-20M  holds a small light, monitor, or can be used to mount anything that has a 1/4"-20 female thread. - can be used with a grip head on its own. - can be...

This is one of those accessories that is a "jack of all trades" type of adapter. It consists of two baby 5/8" (16mm receivers) on either end joined by a tilting pivot and a ratcheted metal handle to...

Designed to mount a lighting fixture or accessories on to a baby swivel pin and can be angled in almost any direction. Has a ratcheted handle to allow for easy positioning and complete axis...

Designed for holding a single Kino Flo fluorescent lamp/tube with double spring steel clips. Easily mounts into a grip head and can be positioned easily with the swivel ball joint design.

The 5/8" Baby Stud with 3/8"-16 Male Thread from Kupo can be used with a grip head or Super Clamp and attached to any accessory with female 3/8" threads, such as an articulating...

Measuring 3.5" in length, this 5/8" Baby Stud with 1/4"-20 Screw Mount from Kupo is a small accessory for a lighting grip kit. It offers a 1/4"-20 screw as its mounting point,...

HIGHLIGHTS 13.2 lb Load Capacity Aluminum Construction 1/4"-20 and 3/8"-16 Taps Rubber-Padded Jaws DESCRIPTION  The Super Claw from Kupo is a scaled down, lighter weight...

HIGHLIGHTS Accepts Select Convi Accessories Lightweight Alloy Construction Stainless Steel Bolts Supports up to 44 lb DESCRIPTION The Convi Clamp from Kupo has a hexagonal...

HIGHLIGHTS 1/4"-20 Top Mount Spring-Loaded Ball Bearing Mechanism Accepts Four Different Top Mounts DESCRIPTION The 1/4"-20 Quick Release Adapter Set from Kupo is a fast...

HIGHLIGHTS Converts 1/4"-20 Stud to 5/8" Baby Stud DESCRIPTION The 5/8" (16mm) Stud with 1/4"-20 Female from Kupo is a small adapter that converts a 1/4"-20 male thread into a...

DESCRIPTION  The Stand Adapter from Kupo is made of steel and allows you to mount a light fixture or accessory with a 5/8" receiver to any stand with a 1-1/8" receiver...

Baby Hex Pin Connection Non-Slip Surface With a silver machined finish, the Kupo 40" Hex Grip Arm with Big Handle has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing,...

Steel and Aluminum Construction 66.1 lb Load Capacity 5/8" Receiver and 5/8" Stud The end jaw, 4" Super Viser Clamp with Hex Receiver from Kupo is a strong and versatile clamp...

Aluminum & Steel Four V-Shaped Jaws Handle With Roller Bearings Non-Slip Aluminum Friction Disc The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an...

Eight Anchor Points Chrome-Plated Steel Finish The Baby 3" Wall Plate, Baby 5/8" Stud from Kupo makes it possible to mount a 3-inch long, baby 5/8-inch stud on a wall,...

Zinc Alloy Base Casting 5x Stronger than Aluminum Patented Spring Ring Locking System Very Fast Setup This silver Turtle Base from Kupo is a replacement base for the Master...

Maximum Load: 19.8 lb Aluminum Construction 5/8" Mount The 12.6' Kupo Baby Kit Stand is designed to hold loads up to 19.8 lb at a maximum working height of 151.60" using a 2 riser, 3...

Notch for Mounting Location Locking Collar The Stud for 3 & 4-Way Clamp is designed to attach to any of the mounting locations on Kupo's 3-Way Clamp (KG900412) or 4-Way Clamp...

Allows Freestanding Use of Kupole Already a legend in Asia, Kupo has introduced a line of high quality grip gear aimed at videographers, broadcast professionals and photographers everywhere...