Angenieux EZ-1 30-90mm S35 Cinema Zoom with Basic Kit 1 (PL)

(No reviews yet) Write a Review
Special Order
4.00 LBS

Product Overview


  • EZ-1 30-90mm S35 Cinema Zoom Lens
  • MSU-1A Servo Zoom Control
  • Lens Hood with Cap
  • Run/Stop & Return Video Functions

This EZ-1 30-90mm S35 Cinema Zoom with Basic Kit 1 from B&H consists of the PL-mount Angenieux EZ-1 30 to 90mm S35 Cinema Zoom lens, the removable MSU-1A Cine Servo zoom control, and a lens hood with cap. The MSU-1A Universal Cine Servo is an ENG-style zoom control featuring a zoom rocker, return function, and a run/stop button.

Angenieux EZ-1 30-90mm S35 Cinema Lens with PL Mount

Angenieux's EZ-1 30-90mm S35 Cinema Lens with PL Mount is a fast zoom for 3-perf Super 35mm sized sensors. This version of the lens ships with a PL mount and the Super 35 rear optical assembly. Optional lens mounts allow you to swap the lens mount from PL to Sony E or Canon EF. It features a T2.0 aperture and focuses down to 2' in front of the image plane while weighing in at only 4.7 pounds. The 114mm front diameter of the lens is a common diameter compatible with cinema-style matte boxes. The lens features independent focus, iris, and zoom control rings with cinema standard gear teeth. A removable support foot can be repositioned for when you need to rotate your lens off of a standard mounting orientation.

Interchangeable Lens Mounts

This lens ships with a PL mount; however, that mount can be swapped with available (not included) E or EF lens mounts.

  • Losing only 1/10 of a stop within the lens, the EZ-1 is extremely efficient. The fast T2.0 maximum aperture in Super 35mm matches the maximum aperture of many standard prime lenses for Super 35mm. This allows you to light to a lower illumination level than would normally be required for many zooms, making for more consistent images as you may not have to relight the scene as is often the case when moving from primes to slower zoom lenses.

Manual Lens Control Rings

Featuring independent manual control rings for focus, iris, and zoom. Each control ring incorporates industry standard 0.8 lens gear teeth.

114mm Front Diameter

The EZ-1 shares the same 114mm front common to the Angenieux OPTIMO lens series, allowing you to easily share matte boxes between the EZ-1 and the OPTIMO lenses.

Temperature Stability

The EZ series of lenses are designed and built to compensate for temperature drifts, which helps reduce the need to recollimate the lens.

Angenieux MSU-1A Single-Motor Cine Zoom Servo for EZ-1 and EZ-2 Lenses

Built specifically for use with the Angenieux EZ-1 and EZ-2 lenses, the MSU-1A Single-Motor Cine Zoom Servo from Angenieux is a removable lens drive unit that provides servo zoom control to EZ-1 and EZ-2 cinema-style lenses. The zoom lens drive gear is positioned to interface with your lens, and is 0.8 MOD to match the cine-style gearing. The servo incorporates a run/stop button, return video, quick zoom, and a traditional zoom rocker.

Further compatibility is ensured by the inclusion of Hirose and LEMO connectors. Those who wish to may use the servo to control with either Canon or Fujinon standard ENG lens pan handles.


The MSU-1A is self-aligning, mounting with three screws and a guide pin


Compatible with Canon and Fujinon standard ENG lens pan handles:

  • 20-pin Hirose - analog and remote Control
  • 12-pin Hirose - direct to lens port on camera
  • 6-pin LEMO - MBUS port

Zoom Demand and Compatibility

Via a 20-pin adapter cable (not included):

  • Fujinon
  • Canon
  • Microforce

Speed and Sensitivity

The motor has been optimized to provide high-speed motor drive while maintaining sensitivity and precision operation

ENG Style Operation

  • Q-Z switch
  • VTR switch
  • Return switch
  • Zoom operation rocker

Angenieux Hood with Cap for Type EZ Zoom Lenses

Designed to fit Angenieux Type EZ zoom lenses, this Hood with Cap reduces glare while helping to protect the lens front. This hood accommodates 127mm filters and fastens around the lens via an integrated screw.


Angenieux EZ-1 30-90mm S35 Cinema Lens With PL Mount

Focal Length 30 to 90mm
Lens Mount ARRI PL
Format Super35/APS-C
Image Circle 30.0 mm
Maximum T-Stop T2.0
Maximum F-Stop f/1.9
Diagonal Angle of View Super35: 50.31 to 17.6°
Minimum Focus Distance From : 2' / 0.6 m
Front Diameter 114 mm
Zoom Ratio 3x
Length 8.9" / 226 mm
Weight 4.7 lb / 2.2 kg
Packaging Info
Package Weight 15.5 lb
Box Dimensions (LxWxH) 25.5 x 14.2 x 13.8"

Angenieux MSU-1A Single-Motor Cine Zoom Servo For EZ-1 And EZ-2 Lenses

Drive Gear 0.8 MOD gear
Material of Construction Housing: Magnesium alloy with Teflon coating
Hand Strap: Nylon with leather pad
Strap Latch: Nylon buckle
Power Consumption Standby: Approximately 1.5 W (15 V, 0.1 A)
Max: 35 W
Temperature Operating: -4 to 131°F / -20 to 55°C
Storage: -22 to 158°F / -30 to 70°C
Dimensions Approximate: 5.75 x 3.75 x 4.1" / 14.61 x 9.53 x 10.41 cm
Weight 15.9 oz / 450 g
Packaging Info
Package Weight 1.6 lb
Box Dimensions (LxWxH) 6 x 5 x 4"

Angenieux Hood With Cap For Type EZ Zoom Lenses

Filter Size 127 mm
Packaging Info
Package Weight 1.02 lb
Box Dimensions (LxWxH) 8.8 x 7.55 x 4.55"


(No reviews yet) Write a Review