$199 Pre-Order Deposit for Canon EOS C300 Mark III Digital Cinema Camera (Body Only)
- 3795C002 - Preorder
- 4.00 LBS
EXPECTED PRICE: $10,999.00
This is a pre-order deposit only. This will not guarantee the item will be sold for $199.00 and it is not the actual price of the product. Customers placing a deposit must also pay the remaining balance before the item can be shipped.
$199.00 Pre-Order Deposit
- Pre-Order deposit is non-refundable
- Deposit goes towards final price
- This Pre-Order is a non physical item
- Physical shipment and shipment cost of an item will occur when remaining payment is finalized.
- An email notification will be sent with a link that requires you to pay the remaining balance of the product when shipment is ready.
Impressive usability and imaging power combine in the EOS C300 Mark III, the customizable cinema camera that’s built for versatility and flexibility.
The lightweight body comes equipped with Canon's new Super 35mm Dual Gain Output (DGO) Sensor capable of over 16 stops of dynamic range. The DIGIC DV 7 Image Processor expands functionality and flexibility by enabling features such as internal RAW recording, 4K 120p High Frame Rate recording, and Dual Pixel Autofocus.
The EOS C300 Mark III is the perfect expression of form and function, exceptionally adaptable to virtually any production with its modular design. Three expansion units and user changeable lens mounts enable operators to build their ideal system for cinema or broadcasting.
NEW! Canon Super 35mm Dual Gain Output (DGO) Sensor
The EOS C300 Mark III features Canon’s next generation Super 35mm Dual Gain Output (DGO) Sensor. This new sensor is capable of dynamic ranges in excess of 16 stops and is compatible with Canon’s exclusive Dual Pixel CMOS Autofocus technology.
The DGO Sensor is a newly-developed imaging system that generates high dynamic range and maintains low-noise levels by reading out each pixel with different gains. It combines images using pixels shot with a saturation-prioritizing amplifier for bright
areas, and a lower-noise noise-prioritizing amplifier for darker areas.
DIG!C DV7 Image Processor, which powerfully processes high-resolution image data
The EOS C300 Mark III features Canon’s DIG!C DV7 image processor that takes the extensive RAW information captured from the imaging sensor and processes it for output. DiG!C is also the engine behind features such as high frame rate recording, Dual Gain Output (DGO) Sensor, Dual Pixel Autofocus, Cinema Raw Light Recording, HDR (PQ) output, Electronic Image Stabilization, and proxy recording.
High Frame Rate; 4K 120P and 2K CROP 180P
The EOS C300 Mark III is capable of ultra-high frame rates with its new chip design and DiG!C DV7 processor. Frames rate up to 120 fps can be obtained in 4K, while 2K CROP mode provides even greater flexibility with speeds up to 180 fps.
Modular Design with three available Expansion Units allows a high level of connectivity and interoperability
A new modular design allows productions to optimize and customize the EOS C300 Mark III to specific shooting needs. Accessories and expansion units can be easily attached to provide different levels of functionality. The camera is equally at home fully rigged with a large zoom lens, FIZ unit, audio accessories and rangefinder as it is stripped down flying on a drone.
Canon Log 2 and 3
The EOS C300 Mark III supports both Canon Log 2 and Canon Log 3 Gamma. In post-production, Canon Log is designed to reproduce the entire tonal range that the CMOS image sensor is capable of. Log workflows provide the user with higher dynamic range, more highlight and shadow retention, and more flexibility in grading.
Canon Log 2 provides the largest dynamic range and image detail. While Canon Log 2 provides the most post-production flexibility and full dynamic range of the sensor, it typically requires more time in color correction.
For users looking for most of the benefits of log workflow, but with shorter turnaround times, Canon Log 3 provides an alternative with only a slightly reduced dynamic range of 14 stops.
LM-V2 4.3” LCD Touch Screen Monitor
The LM-V2 4.3” LCD Monitor is an easy to view touch panel with approximately 2.76 million dots. The monitor easily attaches to the EOS C300 Mark III using included accessories and can be adjusted to different viewing positions. The LCD monitor is capable of displaying both image framing and visual confirmation of camera settings. Additionally, the display has a control interfaced to make it easy to access and change camera settings.
4-Channel Audio Recording
The EOS C300 Mark III supports up to 4-channel audio recording. Audio input from the camera’s internal microphone, mini mic port, and XLR ports can be assigned to the 4 different audio channels. With Expansion Unit EU-V2, a total of 4 XLR ports are supported. This flexibility allows a wide range of audio devices to be connected and mixed directly on the camera.
Support for Custom User LUTs
Users can upload and apply custom LUTs to the EOS C300 Mark III. LUTs can be assigned to specific output terminals, LCD and viewfinder. Clients can be viewing one LUT, while production works from another, giving different production roles the ability to customize the look of the image to their needs.
User Interchangeable Lens Mounts
User interchangeable lens mounts and an available B4 mount adapter gives operators the freedom to make bold creative choices based on the subject matter.
The EOS C300 Mark III ships with an EF Mount that can be user swapped to an optional Locking EF (EF-C) or PL mount. Each mount swaps easily by simply removing four M3 hex screws. A shim set is provided with each mount kit in order to adjust back focus for the precision in focusing accuracy that professionals rely on.*
*Depending on the mount the user has in place. Mounts need to be both swapped and shimmed correctly.
Anamorphic Lens Support
The EOS C300 Mark III offers cinematographers support for the use of both 2.0 and 1.33 anamorphic lens types. Users can achieve the wide cinematic looks, oval bokeh, and striking flares particular to anamorphic glass. It is a distinctly cinematic palette that is within reach for your next project.
Canon Cinema RAW Light and XF-AVC Recording
Thanks to the powerful DIG!C DV7 image processing platform, the EOS C300 Mark III can record Cinema RAW Light directly to onboard CFexpressTM cards. Cinema RAW Light offers plenty of freedom for grading with a dynamic range that can exceed 16 stops with Dual Gain Output (DGO) technology, while maintaining file sizes that are about 1/3 to 1/5 the size of Canon Cinema RAW. Canon Cinema RAW Light offers a great combination of codec efficiency and quality.
In addition to the conventional Intra-based XF-AVC codecs, we have added a 4:2:2 10 bit Long GOP-based codec with consideration for a balance of quality and data rates. This new Long GOP-based codec has a data rate that is less than half that of the conventional Intra codecs. This new lightweight codec makes it easier for users to reduce media costs and work with cloud-based infrastructures.
The EOS C300 Mark III Digital Cinema Camera incorporates the new Canon XF-AVC codec that allows 4K and 2K image data to be recorded internally onto CFexpress cards in workflow efficient file sizes using advanced video compression. Using the XF-AVC codec, the EOS C300 Mark III can record a variety of frame fates up to 4K 120p and 2K up to 180fps.
Higher resolution, greater bit depths and faster frame rates provide versatility and greater image quality but come at the cost of much larger file sizes. Proxy files can greatly speed up the editorial process by providing a lower bandwidth alternative for initial file sharing and rough cutting.
Canon’s powerful, high-speed DIGIC DV7 image processor makes it possible for the EOS C300 Mark III to simultaneously record 2K Proxy files. Cinema RAW Light can be recorded to the internal CFexpress card while an XF-AVC 2K 4:2:0 8-bit Proxy can be recorded directly to an internal SD card. Then C300 Mark III can also apply LUTs to Proxy recording.
Electronic Image Stabilization
The EOS C300 Mark III includes the same built-in five-axis electronic IS introduced with the EOS C500 Mark II that works with almost any lens, including anamorphic.
Support for 12G SDI allows for the EOS C300 Mark III to output 4K resolution up to 60p over a single BNC cable.
Dual Pixel CMOS Autofocus with support for Touch AF and Face Detection
The Cinema EOS C300 Mark III features Canon’s Dual Pixel CMOS AF Technology. For DAF, each pixel in the camera’s CMOS sensor is configured with two photodiodes. Two independent image signals can then be detected at each photosite and compared using phase-difference to provide autofocus with compatible lenses. DAF can survey the scene and recognizes not only whether the subject is in focus or not, but in which direction (near or far), and by how much. DAF also powers the intuitive Focus Guide for users who prefer to focus manually but enjoy the positive feedback DAF provides through the guide interface.
RC-V100 Support and LANC Compatible
The EOS C300 Mark III body has a remote A terminal (LANC) on the body and supports remote B (RS422) in both expansion unit EU-V1 and EU-V2. Through these connectors, the EOS C300 Mark III can be completely remote operated either by a standard LANC compatible cable or over longer distances through the use of a serial connection.
4096x2160: when 4096 x 2160 or 2048 x 1080 is selected as the resolution (Approx. 8.85 megapixels)
3840 x 2160: when 3840 x 2160 or 1920 x 1080 is selected as the resolution (Approx. 8.29 megapixels)
|Total Pixels||4206 x 2280; Approx. 9.6 megapixels|
4K: 26.2 x 13.8 (29.6 mm diagonal)
UHD: 4K: 24.6 x 13.8 (28.2 mm diagonal)
|Sensor Modes||Super 35mm, Super 16mm(cropped)|
|Pixel Pitch||6.4 μm|
|Number of Sensors||1|
|Filter||RGB Primary Color Filter (Bayer Array)|
|Imaging Processor||DiG!C DV 7|
Default Mount: EF
Optional: EF-C locking, PL
*All mounts are interchangeable
**Supports both EF and EF-S lens
|Zoom/Focus Preset||Not Available|
|Shockless Zoom||Not Available|
|Digital Teleconverter||Not Available|
Mechanical ND filter system with option of clear, 2, 4, and 6 stops; 8 and 10 stops in extended mode
Peripheral Illumination Correction
Exposure and Metering
(1) Manual exposure based on shutter setting, iris setting, ISO/gain setting, and ND filter setting
(2) Push auto iris control, auto iris control
|Metering Modes||Standard, Spotlight and Backlight|
Normal Setting -6dB to 54dB TBD
Fine Setting -2dB to 54dB in 0.5 dB increments
|ISO||100 to 102, 400|
|Auto Gain Control (AGC)||Not Available|
|Shockless Gain||Not Available|
|Exposure Compensation/AE Shift||–2.0 to +2.0 in 0.25 point intervals|
3 Modes: OFF; Speed; Angle; Slow Shutter; Clear Scan
Speed Mode is selected in 1/3 or 1⁄4 stop increments
|Shutter Speed Range||
59.94Hz/24.00Hz: 1/12 to 1/2000
50.00Hz: 1/12 to 1/2000
|Shutter Angle Settings||
59.94Hz/50.00Hz/24.00Hz: 360, 240, 180, 120, 90, 60, 45, 30, 22.5, 15, 11.25
|Iris Settings (EF)||
Can be set to 1/2 stop, 1/3 stop or Fine.
(1) Push auto iris control
(2) Auto iris control (Compatible lens required)
(1⁄2, 1/3 stop or fine setting can be selected)
|Autofocus System||Dual Pixel CMOS AF|
Manual focus, continuous AF, one-shot AF, AF-Boosted
MF, face detection AF
Only lenses that support AF functions can be used in AF modes
External Recording Output
59.94 Hz, 50.00 Hz, 24.00 Hz
59.94 Hz mode: 59.94i/59.94P/29.97P/23.98P
50.00 Hz mode: 50.00i/50.00P/25.00P
24.00 Hz mode: 24.00P
|Color Gamuts||Cinema Gamut, BT.709, BT.2020|
|Gamma Curves||BT.709, Wide DR, Canon Log 2, Canon Log 3, PQ, HLG|
XF-AVC (10 bit 4:2:2 (CFexpress) or 8 bit 4:2:0 (SD card))
Cinema RAW Light (CFexpress)
CFexpress 2,0 (Type B) x 2 slots
SD Card (Still Images (JPEG), Custom Picture Data, Clip
Metadata, and menu settings); SD/SDHC/SDXC Supported
XF-AVC: MXF (OP-1a)
SDHC card: (up to 32 GB): FAT32
SDXC card (more than 32 GB): exFAT
File division unit: 4 GB for FAT32, none for exFAT
|Maximum Clip Number||999 (per media)|
|Recording Format||Linear PCM; 4-Channel; 24-Bit; 48 kHz|
|External Audio Inputs||
2 – XLR inputs (Auto and Manual level settings)
External microphone terminal: (3.5 mm diameter)
|Recording Chanel Selection||Up to 4 channel audio recording is supported.|
|XLR Mic Trimming||Available; -12dB, -6 dB, 0dB or +12 dB|
|Recording Level Adjustment Range||- Infinity to +18dB|
|Phantom Power||Available; +48V|
|Headphone Adjustment||16 Settings; Volume is muted at lowest setting|
|Built-in Speaker||Available; Volume Adjustable|
|1KHz Tone||Available (off, -12, -18, or -20 dB)|
Features and Performance
Clip Display: 3x4 Index Display.
Clip Playback: Forward Search (x5, x15, x60), Reverse
Search (x5, x15, x60), Forward frame Advance, Reverse
Frame Advance, Record Review, Skip to next clip, skip to previous clip
Clip information Display: Clip Metadata display, custom picture settings
Playback Functions: Clip Delete
Photo Playback: index, single playback, delete, protect
|Slow and Fast Motion Recording||
Available; Records at a different frame rate then the playback rate allowing for fast and slow motion effects:
|Special Recording Functions||
Relay Recording*; Double-Slot Recording**
* Not available during Slow Motion recording
** Not available in combination with Slow and fast motion recording or relay recording
|Photo Recording Mode||Available; Images captured to SD Card|
Available (HDR Compatible);
(a) Line display
(b) Line + spot: Line display over a red waveform in a red frame.
(c) Line select display
(d) RGB (parade)
(e) YPrPb (parade)
Output gain can be selected as either 1x or 2x. With gain set to 2x, the vertical axis (Y-position) offset value can be chosen.
When gamma is set to PQ, an PQ index (nits index) can be displayed. When gamma is set to HLG, an HLG index (0.0– 1.0 relative index) can be displayed.
Peaking (2 types), Zebra Pattern, Magnify, Black and White Mode, Focus Guide
|Frame Record||Not Available|
|Pre-Record||Yes, 3 seconds cache (Audio and Video)|
|Time Code||Drop Frame (DF) and Non-Drop Frame (NDF)|
|Time Code Modes||Regeneration, Record Run, Free Run and External Source|
|Auto White Balance (AWB)||Available|
|White Balance Presets||Daylight (5,600K); Tungsten (3,200K), Custom A, Custom B|
|Auto Black Balance||Available|
|Custom Picture Settings||
20 Custom Picture settings
Custom pictures can be adjusted using the following settings and saved for later recall:
Gamma, Black, Black Gamma, Low Key Saturation, Knee, Sharpness, Noise Reduction, Skin Detail, Selective Noise Reduction, Color Matrix, White Balance, Color Correction, Setup Level
Custom Pictures can be saved to an SD card for later use or transferring between cameras
Yes; LCD panel and EVF information display can be customized
|On Screen Markers||
Available marker options include center, horizontal, grid, aspect, safety zone, and user marker.
With user markers, user can set their preferred size and position.
Markers can be displayed in yellow, blue, green, red, black, gray, or white.
18 total assignable button (15 assign buttons provided on camera body, 1 on the grip and 2 buttons on the monitor unit)
Color bars compliant with SMPTE, EBU, or ARIB standards can be selected depending on system frequency selected
59.94 Hz: f/10 (2048x1080/59.94P) or f/14 (1920x1080/29.97P)
50.00 Hz: f/11 (2048x1080/50.00P) or f/16 (1920x1080/25.00P)
All values for ISO 800, 2000 lux, and reflectance rate of 89.9%
Canon Log 2: 1600% / 16+ stops (ISO 800)
Canon Log 3: 1600% / 14 stops (ISO 800)
4.3-inch (10.9 cm diagonal) color wide-screen LCD
Approx. 2,760,000 dots (1280 x RGB x 720),
|Field of View Coverage||100%|
|Display Adjustments||Brightness, Contrast, Color, Sharpness, and Luminance|
HD: SMPTE 292
3G: SMPTE 424, SMPTE 425
6G: SMPTE ST 2081
12G: SMPTE ST 2082
Audio: SMPTE ST 299
BNC Connector, output only
Resolution: 2048x1080 / 1920x1080
Frame Rates: 23.98p/24.00p/25.00p/29.97p/30p/59.94p/50p/60p
|Time Code In/Out||Yes; BNC Connector (Input and Output)|
Supported when optional expansion unit EU-V1 or EU-V2 in attached (Shares function with Synch Out)
Adjustment range: -1023 to +1023
Supported when optional expansion unit EU-V1 or EU-V2 in attached (Shares function with Genlock)
HD tri-level signal (HD Sync) 1920x1080: 59.94i/50i/23.98/24.00, 1280x720: 59.94p/50p/23.98, 24.00
Yes (Type A) [4096x2160/3840x2160]/1920x1080/1280x720
|Audio Input Terminal||
2 – Balanced 3-pin XLR (Mic Level, Mic Level with phantom power and Line Level)
3.5mm Microphone terminal
|Headphone Jack||Available; 3.5mm stereo mini-jack|
Remote A (Standard – LANC Compatible or RC-V100)
Remote B available In conjunction with expansion unit EU-V1 and EU-V2
Remote control through WFT-E9
|Supply||14.4V DC (Battery Pack)|
DC IN 12V jack: DC 11.5V - 20V
DC 12–20V (using V-mount battery with EU-V2)
|Compact Power Adapter||CA-CP200B|
|Tripod Adapter||Canon TA-100|
|Expansion Units||EU-V1, EU-V2|
|Mounts||PL Mount Kit PM-V1, EF Cinema Lock Mount Kit CM-V1|
|Adapter||MO-4E (EF to B4), MO-4P (PL to B4)|
(Width x height x depth, excluding cable and grip belt)
Body Only: Approx. 153 x 148 x 168 mm (6.0 x 5.8 x 6.6 in.)
Body and Grip: Approx. 183 x 148 x 189 mm (7.2 x 5.8 x 7.4 in.)
Body, Grip, Handle, Mic Holder, LCD Monitor LM-V2 and Expansion Unit EU-V2: Approx. 343 x 277 x 333 mm (13.5 x 10.9 x 13.1 in)
EF Camera body (without Camera Grip GR-V1 or thumb rest) Approx. 1.75 kg ( 3.9 lb)*
|Temperature and Humidity||
Performance requirements: 0oC to 40oC, 85% (relative humidity)
Operating requirements: -5oC to 45oC, 60% (relative humidity)
English, Japanese, Chinese, German, Spanish, French, Italian, Korean, Russian
|Time and Date||
Automatic Calendar range January 1st, 2020 through December 31, 2050
World Clock support – UTC time setting: Setting range from +14:00 to -12:00