The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

HME DX100 Wireless Intercom System (4 User/No Headsets)

$5,480.00
(No reviews yet) Write a Review
SKU:
HMEDX100-4B
Weight:
4.00 LBS

Description

4-Up DX100 system without headsets: MB100 Single-Channel stand-alone license-free mobile base station w/2 antennas; 115/230 VAC power supply, 115VAC power cord, AA battery sled for base; 4 BP200 Beltpacks with; 8 BAT41 batteries and 4 pouches; AC40A Battery Charger; 115/230 VAC power supply, 115VAC power cord, manual *No headsets are included with this system*

The HME DX100 allows up to 4 full duplex or 15 push-to-transmit shared users to speak to each other via headsets without any interconnecting cables. Much better than walkie-talkies – you can seamlessly communicate in hands-free mode or have a private conversation on a secured channel. You can even use AA/rechargeable batteries, NiMH, or 12-14VDC/automotive power.

Simple and expandable, the HME DX100 comes complete with everything you need for reliable, cost-effective operation for any application. Now you can mix and match two COMMUNICATOR® models: the WH200 ComLink all-in-one, wireless headset or the BP200 beltpack with your choice of plug-in headset.

System Highlights:

*2.4 GHz license-free operation
*Digital frequency hopping spread spectrum
*Portable, compact design
*Flexible battery-powered operation
*Expandable system 

SPECS

  • System:
    • Frequency Range:
      • All Band: 2400 - 2483.5 MHz
      • Low Band: 2401.9 - 2439.9 MHz
      • High Band: 2443.4 - 2481.4 MHz
    • Frequency Response: 200 Hz - 3.5 kHz
    • Security: 64-bit encryption
    • Temperature Range: -4 to 131° F | -20 to 55° C, typical
    • FCC Acceptance: Part 15 (no license required)
    • Transmit/Receive Type: Frequency-Hopping Spread Spectrum (FHSS)
    • System Transmit:
      • Transmit Power: 100mW burst
      • Transmission Modes: Continuous (Latched) or Push-to-Talk (PTT)
      • Modulation Type: Gaussian filtered FSK, TDMA
    • System Receive:
      • Sensitivity: < -90 dBm with 10__³ BER
      • Dynamic Range: -90 dBm to -20 dBm
      • Distortion: < 2%
  • MB 100 Base Station:
    • Power Requirements: (6) 1.5V AA batteries or BAT850 rechargeable battery; 12VDC automotive adapter or 100/240VAC power supply
    • Front Panel Controls: Power switch, register beltpack, beltpack unlatch, clear registration, reset button
    • Front Panel Indicators: Beltpack registration status display, power/low bat indicator, beltpack receive
    • Size: 10.2 x 6.45 x 3.3 in | 25.91 x 16.38 x 8.46 cm
    • Weight: 2.35 lbs | 1.07 kg, w/ alkaline batteries
  • BP 200 Beltpack:
    • Battery Requirements: (1) Lithium-Ion, rechargeable
    • Battery Life:
      • Latched (Hands-Free): Up to 14 hours
      • PTT: Up to 20 hours
    • Headset Connector: Mini-DIN
    • Mic Input: Electret
    • Headset Output: 160 mW into 32 Ω capable of driving 16-32 Ω
    • Controls:
      • Volume On/Off
      • Volume Up/Down
      • Talk Intercom
      • Talk ISO
    • Indicators: Power/transmit/low battery LED and voice prompts
    • Size: 3.4 x 2.6 x 1.5 in | 8.64 x 6.6 x 3.81 cm
    • Weight: 7.4 oz | 0.21 kg, with battery and pouch