All prices are in USD
Arri MBH-1 Microphone Bracket Holder
åÊThe Microphone Holder Bracket provides offset support for any standard microphone bracket fitted with a 3/8" thread. The Microphone Holder Bracket can be attached to any ARRI 3/8" accessory interface, such as handles, cage...
Atomos Replacement LEMO Type to XLR Breakout Cable for Shogun
QUICK BITS Two 3-Pin XLR Inputs / Two Outputs Record Audio from Mics, Mixers, Etc. Phantom Power Input This is the same Atomos LEMO Type to XLR Breakout Cable that comes included with the Shogun. Featuring two XLR...
Felston DD740 Four-Input Digital Audio Delay
680ms delay (340ms for 96kHz signals)
On-the-fly adjustment with no image overlay
Tweaking in 1ms and 1/3ms steps
36 preset delays for instant recall
Fully featured remote control with numeric keypad for discrete delay...
HME DX100 Wireless Intercom System (4 User/No Headsets)
4-Up DX100 system without headsets: MB100 Single-Channel stand-alone license-free mobile base station w/2 antennas; 115/230 VAC power supply, 115VAC power cord, AA battery sled for base; 4 BP200 Beltpacks with;...
Hosa Technology Stereo Mini (3.5mm) Female to 2x 1/4" Mono Male Y-Cable - 6"
This Hosa Stereo Mini Female to 2x 1/4" Mono Male Y-Cable can be used to split a stereo mini 3.5mm signal to two 1/4" mono connections, or to combine a Left and Right 1/4" signal into one mini stereo female jack...
IDX System Technology A-WMR Wireless Receiver Mounting Bracket
Attaches to V-Mount Camcorders
Attaches without Screws
D-Tap Connector Supplies 50W
Adjustable Plate Depth
Detachable Rear Panel
The IDX A-WMR Wireless Receiver Mounting Bracket is an optional...
juicedLink RA222 Riggy-Assist Dual-XLR Preamplifier with Phantom Power and Metering
Two Locking XLR Input Connectors Low-Noise Microphone Preamplifiers 4-Segment Meters can be User-Calibrated Switchable 12V / 48V Phantom Power Audio Output Bracketing Feature AGC Disable Switch Mic/Line Signal Level...
Monoprice PREMIUM Metallic HDMI® Active Equalizer Extender Repeater - Extend Upto 131FT
PREMIUM Metallic HDMI® Active Equalizer Extender Repeater - Extend Upto 131FT
This HDMI® equalizer is used to extend the effective length of HDMI cables up to 100ft. It works by using the internal power of the...
Panasonic AJ-MH800G Microphone Holder for AJ-HDX900
The Panasonic AJ-MH800G is a microphone holder for the AJ-HDX900 camcorder. The holder will house a standard shotgun microphone and is ideal for news gathering, weddings, documentary, and sports...
Panasonic DMW-XLR1 XLR Microphone Adapter
Expand the audio capabilities of your DC-GH5 mirrorless camera with this shoe-mounted DMW-XLR1 XLR Microphone Adapter from Panasonic. It connects to the camera directly through the hot shoe and provides two...
Rode Boompole for Rode NTG-1, NTG-2 and Video Mic (10')
PRODUCT HIGHLIGHTS Measures 10' (3m)Five Collapsing SectionsFits NTG-1, NTG-2 & Video Mic3/8" Threaded StudRode's Boompole provides up to 10' of extension for shotgun microphones. The pole uses a 3/8" industry-standard...
Rode DS-1 Microphone Desk Stand
PRODUCT HIGHLIGHTS Adjustable 11 to 15.74" (280 to 400mm)Includes Cable ClipsIncludes 3/8" to 5/8" AdapterThe Rode DS1 Microphone Desk Stand is designed to securely desk-mount any microphone. The stand features an adjustable...
Rode invisiLav Discreet Lavalier Mounting System (3-Pack)
Product HighlightsFor Concealing Lavalier MicsAbsorbs Noise & Vibration2 Mounting Points for Redundant MikingMade of Skin-Safe MaterialIncludes Skin-Safe Adhesive
The 3-pack of the invisiLav Discreet...
Rode LAV-CLIP Clip Mount for Rode Lavaliers (Pack of 3)
PRODUCT HIGHLIGHTS Secures Rode Lavalier MicrophonesThese Rode LAV-CLIP Clip Mounts are sold as a pack of 3 and are used to secure Rode lavalier microphones onto clothing. Dimensions (HxWxD) 0.94 x 0.43 x 1.06"...
Rode PG1 - Pistol Grip Shock Mount for Shoe Mounted Microphones
Product HighlightsIdeal for Rode VideoMic SeriesAccommodates Cold-Shoe ShotgunsBoom Mountable with 3/8" BaseThe Rode PG1 Pistol Grip Shock Mount is an ideal solution for the Rode VideoMic, Stereo VideoMic and other cold-shoe...
Rode SM3 - On-Camera Shock Mount for Shotgun Microphones
PRODUCT HIGHLIGHTSCamera Shoe MountAdjustable SuspensionFits Most Shotgun Microphones The Rode SM3 is a unique universal shock mount for shotgun microphones, featuring a 4-way rubber suspension system with a quick-release...
Rode Stereo Mini Male to Stereo Mini Female VideoMic Cable - 10'
This Rode Mini Phone VideoMic Cable is a 10' long extension cable that can be used to position the VideoMic up to 10' away from the video camera. For the most of its length this cable is straight, but also features a short...
Rode VXLR - Mono Mini-Jack to XLR Converter
The VXLR from Rode Microphones is an adapter that converts a 3.5mm mini jack input to a male XLR output. The adapter is useful for connecting a microphone with a mini jack connect to an XLR input...
Rode VXLR Plus - 3.5mm to XLR Adapter with Power Converter
Converts Phantom Power to Plug-In Power
Accepts 12-48V Phantom Power
Outputs 3-5V Plug-In Power
3.5mm TRS Female Jack
XLR 3-Pin Male Connector
Lightweight and Compact
The Rode VXLR...
Rode WS6 Deluxe Windshield for the NTG2 and NTG1 Microphones
Product HighlightsFits Rode NTG2 and NTG1Soft Wind-muff TextureExcellent Wind Noise ProtectionThe Rode WS6 Deluxe Windshield provides excellent noise protection against high wind and adverse weather conditions. The slip-on...
Mon to Fri:
9am - 6pm (PST)
Weekends: Phone Support
© 2017 Hot Rod Cameras. All Rights Reserved.
Back to Top
We’ll follow up with you via email within 24-48 hours