All prices are in USD
ARRI 138mm Filter Ring 114mm Size R1
R1 Filter Rings – for 138mm Filter (165mm ring diameter)Fits in filter stages with Ø 165mmlike most Filter Stages for MB-14 and MB-28Filter Rings 138mm do take Round Filters in the back with a diameter of...
Arri 3/8" Accessory Adapter, 18.65 square
The Accessory Shoe Adapter attaches via 3/8" UNC thread with two locating pins for stability, for use with Arri 18.65mm shoe-mounted accessories1
Arri BP-9 Bridge Plate
The BP-9 helps optimize camera rig balance when combined with the range of ARRI bottom plates. It brings compatibility with studio 15 mm rod systems to an increasing number of ARRI and third party cameras.Main Features ...
ARRI Bracket for RED BOMB EVF
The viewfinder bracket for BOMB EVF (LCOS) allows the viewfinder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1.
ARRI Broadcast plate for RED DSMC2
Broadcast plate for RED DSMC2 The ARRI Broadcast Plate for RED DSMC2 is a documentary-style baseplate compatible with VCT-style plates such as the ARRI QRP-1...
Arri Cable LBUS (0.46m/18") - 45.7 Centimeters
åÊArri 20cm LBUS cable (Le 4p to Le 4p) compatible with the ALEXA Mini video camera.
Arri Cable LBus to LCS
Connects Universal Motor Controller UMC-4 (from SUP 1.2) to cforce lens motors. Length: 0.8m/2.6ft. Note: Requires motor power supply through the unused cforce motor LBUS connector (e.g. with K2.0006758 Cable LBUS to D-Tap)...
ARRI Cable UDM to UMC
Quick Bits Length: 1.5m/5ft. Overview Cable UDM to UMC connects UDM-1 to Universal Motor Controllers Length: 1.5m/5ft...
Arri Cable; LBUS (0.8m/ 2FT)
Cable LBUS 0.8m/2.5ft
ARRI Case for SMB-2
Quick Bits 10000 gråÊ 320x500x410 mm Overview The ARRI Case specially designed for SMB-2 with variable dividers.
Arri cforce Plus Lens Motor
Quick Bits Strong enough to move the geared rings of any standard lens in a very fast and pleasant manner, the cforce plus features twin LBUS connectors that allow up to three cforce motors to be daisy-chained in a row...
ARRI Cine Plate for RED DSMC2
Cine plate for RED DSMC2 The ARRI Cine Plate for RED DSMC2 fits over classic studio bridge plates such as the ARRI BP-8 and BP-9, and offers a pair of sturdy rosettes...
ARRI EVF bracket for RED DSMC2 Viewfinder
The viewfinder bracket for DSMC2 RED EVF (OLED) allows the viewfinder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1. ...
Arri F4 5 x 5" Filter Frame
For use with MMB-2 top load, LMB-5, LMB-15, LMB-25, MB-19)
ARRI FF-5 Adapter for Bridge Plate 19 mm
Quick Bits Converts the Arri Follow Focus FF-5HD to the standard studio configuration utilizing 19mm iris rods Overview This adapter converts the Arri Follow Focus FF-5HD to the standard studio configuration utilizing 19mm...
Arri Flexible Shaft
Short flexible extension for offset control of SMB-1 tilt module and geared frame mechanisms
Arri Hand Unit AC Power Supply HPS-1
Arri K2.42306.0 18-180mm MB-14 Mask Set
This Hard Mask Set is designed for the MB-14 Mattebox, and includes six different sizes ranging from 18mm to 180mm. Fits straight into carrier and sunshade...
ARRI LCUBE CUB-1 (Basic Set)
Quick Bits *NEW ITEM* includes: K2.0008630 1x LCUBE CUB-1 K2.0009620 1x LCUBE Bracket Note: LBUS cables need to be ordered separately.åÊ Overview Miniature converter box converting the LBUS protocol to serial protocols...
ARRI LMB-25 / MB-19 Set of Mattes anamorphic
THIS SET OF MATTES INCLUDES 5 ANAM. MATTES AND FITSTO FOLLOWING MAT BOXES: LMB-25, MB-19TH
Mon to Fri:
9am - 6pm (PST)
Weekends: Phone Support
© 2018 Hot Rod Cameras. All Rights Reserved.
Back to Top
We’ll follow up with you via email within 24-48 hours