All prices are in USD
Arri Articulating Handgrip Set
The Arri Articulating Handgrip Set is a heavy duty and ergonomically designed handgrip intended for use with any of their range of cameras via the rosette fitting. The kit includes a recording button and has a short...
Arri Center Camera Handle, CCH-2
Quick Bits Compatible with all generations ALEXA M ALEXA Mini AMIRA Overview Attaches to the ALEXA M and ALEXA XT M head or Top Adapter Plate for Sony F-5/F-55 and provides numerous 3/8"-16 UNC threaded mounting points...
Arri CTH-1 Cage Top Handle
The Cage Top Handle CTH-1 is designed to fit on any single 3/8-16-inch interface found on the ARRI Cage System. The CTH-1 offers numerous mounting points in the industry standard 3/8-16 and 1/4-20-inch thread sizes...
Arri Extension for ARRI Handgrips
A short aluminum rod that attaches between camera body and handgrip to move the handgrip further away (left or right) from the camera body.
Arri Hand Grip Set for MMB-2 (pair)
One pair of Arri Hand Grips for the MMB-2 Mini Matte Box.
Arri Handgrip on/off switch Hirose 4-pin
Arri (K2.66278.0) Handgrip on/off switch Hirose 4-pin. The handgrip with integrated cable for triggering the Sony F5/F55 and Panasonic VariCam 35/HS, using the 4-pin HiRose connector could be used on ARRI standard rosette...
Arri Handgrip Set
The Arri K0.71033.0 Handgrip Set is an extremely durable set of articulating right and left handgrips with extensions for hand holding all ALEXA cameras. Attaches to ARRI rosettes at the camera or through UBS-2 and...
Arri Handgrip Set Right
Lightweight and durable ergonomic handgrip based on ARRI rosettes. Can be attached to rod bridge supports such as UBS-2 and LBS-2 or directly to the camera native rosette mounts. Triggers run functionality on cameras...
Arri Handgrip with on/off switch RS-3 pin
Arri (K2.47862.0) Handgrip with on/off switch RS-3 pin with RS 3-Pin connector; cables with other connectors available.
Arri Handgrip without on/off switch
ARRI handgrips and shoulder sets allow precise camera operating thanks to numerous set-up possibilities. Offset and extensions can be customised to the operator's needs. Strong steel ARRI rosette connections ensure stability...
Arri Handle Extension Block (HEB-3)
Arri HEB-3 Handle Extension Block, attaches to the ALEXA Center Camera Handle (CCH-1) or any 3/8"-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1), the tape hook is excatly in...
Arri LBS-2 Handgrip Set on/off Hirose 4-pin
LBS-2 Handgrip Set on/off Hirose 4-pin. Lightweight and durable handgrip set based on ARRI rosettes. Can be attached to 15mm LWS rods.Triggers run functionality on cameras fitted with 4-pin Hirose run signals, such as Sony...
Arri LBS-2 Handgrip Set on/off RS 3-pin
The Arri K0.0001803 LBS-2 Handgrip Lightweight and durable handgrip set based on ARRI rosettes. Can be attached to 15mm LWS rods.Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA, AMIRA...
Arri LBS-2 Handgrip Set without on/off
Arri LBS-2 Handgrip Set without on / off switch, this handgrip configuration can be used with any camera, fitting to 15 mm lightweight support rods.
Arri Standard ARRIFLEX right-hand articulating Camera Handgrip
Arri (K2.45886.0) Standard ARRIFLEX right-hand articulating Camera Handgrip. For use with digital cameras, additional adapter cable required: K2.47649.0 - Digital Camera Handgrip Adapter Cable.
Arri UBS-2 Handgrip Set on/off Hirose 4-pin
UBS-2 Handgrip Set on/off Hirose 4-pin. Can be attached to 15mm LWS rods as well as 15mm and 19mm studio rod systems. Triggers run functionality on cameras fitted with 4-pin Hirose run signals, such as Sony PMW F5 and F55...
Arri UBS-2 Handgrip Set on/off RS 3-pin
The Arri K0.0001804 UBS-2 Handgrip Set can be attached to 15mm LWS rods as well as 15mm and 19mm studio rod systems. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA, AMIRA and many...
Arri UBS-2 Handgrip Set without on/off
This handgrip configuration can be used with any camera, fitting to 15mm or 19mm studio rods or 15mm lightweight support rods.
ikan Tilta Wooden Handles with ARRI Rosettes and Two Extension Arms
PRODUCT HIGHLIGHTSAttaches to ARRI Standard RosettesCompatible with LSW BaseplateStart/Stop Record Button on Right Handle16 to 34" Coiled LANC Cable IncludedTwo 6" Long Extensions Arms These two Tilta Wooden...
OConnor O-Grips Deluxe Set
PRODUCT HIGHLIGHTSFour Single Handle Ball Joint GripsEach Hand Grip Supports up to 44 PoundsStainless Steel with Titanium Core3/8-16 Male & Female EndOne Handed Adjustment Once AttachedGrips Modules are StackableRod Bridge...
Mon to Fri:
9am - 6pm (PST)
Weekends: Phone Support
© 2017 Hot Rod Cameras. All Rights Reserved.
Back to Top
We’ll follow up with you via email within 24-48 hours