All prices are in USD
Arri - MMB-2 Basic Module double 4"x5.65"
114 mm backThe ARRI MMB-2 is a compact and lightweight matte box for use clamped onto a lens or on lightweight 15 mm rods. With a wide range of available accessories, the MMB-2 is a fully featured matte box that fits well...
Arri - Reverse Gear
Reverse Gear to flip focus direction of FF when using Nikon lenses, for FF-5 and FF-4 (with FF-4 only with 2x K2.65259.0)
Arri - Reverse Gear Set
For FF-5 and FF-4 (with FF-4 only with 2x K2.65259.0)
Arri - Side Flag Set for MMB-2
The Side Flag Set is a pair of side flags and their holders for the Arri MMB-2 mattebox. Set includes 1 x K2.66150.0 MMB-2 Side Flag left 1 x K2.66148.0 MMB-2 Side Flag right 2 x K2.66134.0 MMB-2 Side Flag...
Arri - Standard Focus Knob (left side)
Modified for soft stops with fingers. Includes a Flat Marking Disk (K4.32713.0).
Arri - Standard Focus Knob (Right Side)
The Standard Focus Knob fits the right side of the Arri FF-4 and FF5-HD follow focuses. Modified for soft stops with fingers. Includes a Flat Marking Disk (K4.32713.0).
Arri - Top Flag for MMB-1/MMB-2
Top flag for MMB-1 & MMB-2 Mattebox.
Arri - Two-Speed Knob (left side)
With planetary reduction transmission. Also useful when using FF-4 with ENG/EFP Lenses or other Lenses with compressed focus scaling.
Arri - Two-Speed Knob (Right Side)
Arri - Viewfinder Adapter MMB-2
with 1/4" and 3/8" threads
Arri 0.8/32 35 Tooth Module Gear
Arri K2.47557.0 (K2475570) 35 Tooth, 0.8/32 Pitch Metric Module Gear for external focus lenses, 25mm face for Follow Focus MFF-1 & FF5-HD
Arri 0.8/32 35 Tooth Module Gear 1
Arri 35 tooth, 0.8/32 pitch Module Gear for Panavision Lenses with a 10mm face.
Arri 0.8/32 64 Tooth Module Gear
Arri K2.65102.0 (K2651020) 64 Tooth, 0.8/32 Pitch Metric Module Gear when used with FF5-HD approximates drive ratio of FF-4
Arri 13.5" Flexible Focus Whip w/ Knob
The Arri 13.5" Flexible Focus Whip attaches into the focus knob on all Arri FF-1, FF-2, FF-3, FF-4, FF-5 HD and LFF-1 Follow Focus Systems.
Arri 138mm Filter Ring 114mm Size R2
Compatible with Master Prime Lenses, UP 14 mm, UP 180 mm, LDS-UP 14 mm and LDS-UP 180 mm. Takes reduction rings size R4.
Arri 143 mm Rear Plate Conversion Set for MMB-1
Includes: K2.66091.0 - 143mm Rear Plate for MMB-1 K2.65217.0 - Lightweight Support (LWS) for MMB-1 with 143mm back
Arri 15 mm Support Rod Holder
With adjustable rod centering for all common digital cameras.
Arri 15mm Lightweight support rod console
Top console for 15mm LWS rods at the optical center standard.Can be mounted on front and back of Adapter Plate for Epic/Scarlet or can be used for the Cage System. This rod console also can be used for several adapter plates...
Arri 19 mm Support Rod Holder
As replacement or spare part. Included as part of QR-HD1 - Quick Release Baseplate Sets: #338351, HD Baseplate Set 19 x 440mm Rods#338353, HD Baseplate Set 15 x 440mm...
Arri 64 teeth, 0.6 Metric Module Gear
Arri K2.65125.0 64 Tooth, 0.6 Metric Module Gear - Wide Face, for Fujinon ENG Lenses 10mm face, for lenses requiring wider focus gear. For Follow Focus MFF-1 & FF5-HD.
Mon to Fri:
9am - 6pm (PST)
Weekends: Phone Support
© 2017 Hot Rod Cameras. All Rights Reserved.
Back to Top
We’ll follow up with you via email within 24-48 hours