All prices are in USD
Amimon Connex Air Unit Antennas (Pair)
The CONNEX Air Unit Antennas from Amimon features a pair of flat antennas with MMCX female connectors. For optimal placement, please refer to the Connex user manual. MMCX female
Amimon D-Tap Power Cable for CONNEX Air Unit (7.9")
Power from D-Tap Power Source
Works with DJI Ronin / Ronin M Gimbals
The D-Tap Power Cable from Amimon allows the CONNEX Air Unit to power from a D-Tap power sources, such as a professional video...
Amimon Futaba PPM Trainer Port Cable for CONNEX Ground Unit
Connects Futaba Remote to Receiver
For CONNEX Ground Unit
Control Aircraft Camera Gimbal
Connect a compatible Futaba remote control (sold separately) to your CONNEX Ground Unit receiver with this Amimon PPM...
Amimon RX Antennas for CONNEX Ground Unit (5-Pack)
5 Receiver Antennas Facilitates Communication with Air Unit 2 dBi Gain Attach these five Amimon RX Antennas to your CONNEX Ground Unit so that it can receive information from your CONNEX Air Unit transmitter. These antennas...
Amimon S.Bus/CAN Bus Cable for CONNEX Air Unit
Connects Camera Gimbal to Transmitter
Supports S.Bus and CAN Bus Connections
Enables Control Over Camera Gimbal
Connect your drone's camera gimbal to the CONNEX Air Unit transmitter with this Amimon S.Bus/CAN Bus...
Back-Bone 2.97mm 16MP Low Distortion M12
Designed for 1/2.3″ GoPro sensor
FOV: 87° Horizontal
IR-Cut Filter: Yes
Amazing wide angle lens with no ‘fisheye’ distortion...
DJI 1345 Self-Tightening Props for Inspire 1 (Pair) (Discontinued)
*FEW IN STOCK*
PRODUCT HIGHLIGHTSEach Pack Contains Two PropellersOne CW Self-Tightening PropellerOne CCW Self-Tightening PropellerCompatible with DJI Inspire 1 QuadcopterBuilt-In Threads Allow Self-Tightening
DJI 2.4G Bluetooth Data Link for DJI iPad Ground Station
Data Link for DJI iPad Ground Station
Air and Ground Transceiver Units
Up to 1148' Range
Relays Control from Ground Station App
For Beyond Visual Range (BVR) Flights
The DJI 2.4G Bluetooth Data Link is...
DJI 7728 Quick-Release Folding Propellers for Mavic Pro Quadcopter
Foldable to Reduce Storage Space
Quick, Toolless Mounting and Removal
For Use with Mavic Propeller Cage
Set of Two Propellers Included
Replacement part for DJI MAVIC...
DJI 8330 Quick Release Folding Propellers for Mavic Drone
Quick Bits *NEW ITEM* Coming Soon Set of Two Folding Design Quick Release Attachment Overview The 8330 Quick Release Folding Propellers for Mavic Drone from DJI features a set of two propellers, one for each rotational...
DJI 9450 Self-Tightening Propeller Set for Phantom 3 (Part 9)
9" Self-Tightening Design
One Counter-Clockwise (CCW) Prop
One Clockwise (CW) Prop
Built-In Threads Allow Self-Tightening
Integrated Nut Molded Into Propeller
The DJI 9450 Self-Tightening Propeller Set for...
DJI A2 Flight Control System for Multi-Rotor Aircraft
Main Controller, IMU, GPS, and PMU
For Quad, Hex, and Ocoto-Rotor Aircraft
Intelligent Orientation Control (IOC)
Point of Interest (POI)
Intelligent Landing Gear Function
Return to Home Failsafe
DJI Articulating Locking Arm for Osmo
Replaces the Articulating Locking Arm on the Vehicle Mount. Can also be used with the Tripod to provide more stable support for the Osmo.
DJI Battery Charging Hub for Mavic Pro
Charges up to Four Batteries in Sequence
Charges Fullest Battery First
Requires Mavic Battery Charger
Requires Power Bank Adapter
The Battery Charging Hub for Mavic Pro from DJI is designed...
DJI Camera Securing Bracket for Zenmuse H3-3D Gimbal (Part 39)
PRODUCT HIGHLIGHTSSecures GoPro to Its MountReplacement Part of SpareFor Zenmuse H3-3D Only
The DJI Camera Securing Bracket for Zenmuse H3-3D Gimbal holds the GoPro camera securely in place against the...
DJI CAN Hub Module for DJI Flight Controller
PRODUCT HIGHLIGHTSAdds Three CAN-Bus PortsCompatible with Naza-M V2 and Wookong-M The DJI CAN Hub Module for Naza-M is an expansion hub for adding three additional CAN-bus ports. The CAN Hub is compatible with the DJI Naza-M...
DJI Car Charger for Mavic Pro
Charge from Car / 12 VDC Power Source
The Car Charger from DJI allows you to charger your Mavic Pro's batteries from a car or other suitable 12 VDC power source.
DJI Care Refresh for Inspire 2 (1-year)
Covers Accidental Damage Two Replacements at Reduced Cost Tech Support Over the Phone Automatically Registered The DJI Care Refresh provides you with peace of mind, covering damage to your Inspire 2. DJI Care...
DJI Cinessd SSD for Inspire 2 Quadcopter (480GB)
Quick Bits Overview DJI CINESSD uses an NVMe logical device interface specification, features four PCI Expressports and supports FAT32/exFAT file formats. When using a 480GB CINESSD, the Inspire 2 can record...
DJI Cinessd Station for Inspire 2 Quadcopter
The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. This product is manufactured by SZ DJI Baiwang Technology Co., Ltd. affiliated with DJI Group. Packaging Info ...
Mon to Fri:
9am - 6pm (PST)
Weekends: Phone Support
© 2017 Hot Rod Cameras. All Rights Reserved.
Back to Top
We’ll follow up with you via email within 24-48 hours